Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: "MISSING COMPONENTS" error message

31 Jan 2010   #11


If you used the same dvd drive when trying to copy the disk as you did when trying to install, you'd probably get the same results. The idea is to try to eliminate possible causes. Missing components usually means something didn't get copied during the install. Likely causes are jarring the computer at some time when it's trying to read the DVD, a bad install disk, dirt/dust/fingerprints on the DVD. There are other not so likely possibilities, but I'm taking the assumption that you haven't had many problems with your system prior to this. Try it from a different computer. If you don't have one.. see if a friend will do it for you. Not sure what hardware you have, but I'm also assuming it passes the minimum recommended specs.

My System SpecsSystem Spec
01 Feb 2010   #12

Windows XP

this remains to be unsolved..
My System SpecsSystem Spec
01 Feb 2010   #13


You never did post what kind of hardware you're using.. that's relevant information. For example, certain Dell SATA drivers will cause this error. There are lots people here who know enough to help you solve your problem. Just be patient
My System SpecsSystem Spec

05 Feb 2010   #14

Windows XP

sir, HDD is sata..
My System SpecsSystem Spec
05 Feb 2010   #15

Microsoft Community Contributor Award Recipient


My System SpecsSystem Spec

 "MISSING COMPONENTS" error message

Thread Tools

Similar help and support threads
Thread Forum
Error message "BOOTMGR is missing" when booting directly into drive
Hi, I just put together a brand new haswell gaming rig and installed windows 7. Long story short, I copied the contents of my windows 7 installation disc into an internal SATA drive (1600BEVT-22ZCT0) and installed windows onto another internal SATA drive (ST3160215AS). My problem is that in...
Installation & Setup
Direct X components "Not Available" / Arma II Display Adapter Error.
First, here is the basic information about my 2009 MacBook Pro: OS X 10.8.2 (12C60) Processor: 2.26 GHz Intel Core 2 Duo Memory: 4 GB 1067 MHz DDR3 Graphics: NVIDIA GeForce 9400M 256 MB -- I have used boot camp to create a Windows Partition on my Mac and have installed Windows 7. The main...
Error message "No drives found" on boot up after new build & install
Just completed my first build. I have two error messages during the boot sequence that I cannot resolve. The first screen shot during boot is the Asus logo. Next is a black screen that reads: "JMicron Technologies, PCI Express to SATA Host Controller ROM V1.07.23 Detecting drives; Done; No...
Installation & Setup
Win7 pro startup error "Boot MGR missing"/"Operating System Not Found
I just upgraded from Vista Home Premium to Win7 professional x64 hoping to fix the above mentioned problem. After a complete re-install Im getting the same errors. Im not sure of the proper terminology here, but during startup the computer does a scan of all hardware and "Volume 0" has a...
Installation & Setup
network error message: "Error code: 0x80070035". No file shareing help
I have had my vista pc and my windows 7 (basic) net book setup to let me share files (through an Netgear DG834PN Route) for around 18 months with no problems. However as of 3 days ago I can no longer do this and non of the network tools can fined or solve the problem. I can uses the internet...
Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:52.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App