Boot sector on the wrong drive


  1. Posts : 1
    Win 7
       #1

    Boot sector on the wrong drive


    Hi there, i'm a new member and very glad i found this forum because if you people don't have the answer i probably have to format and reinstall...

    I've searched the forum for an answer to my issue and found some things that might be the sollution, but i'm not totally confident it'll fix things, so plz don't flame me for posting an already asked question! :)

    I had a version of Windows 7 installed on drive 0 (schijf 0) it started acting up and doing crazy etc.. so i decided to install a new(er) windows 7 on an another drive, drive 2 (schijf 2).
    The newly installed Windows sadly used the old sector for booting on drive 0, so now i get a dual boot option when i put drive 0 first in the bios and a system disk failure with the new windows 7 install, when i put drive 2 first in the bios.

    I want to entirely format drive 0 with the old Windows, so now i need to get a boot partition on drive 2.

    What would be the best way to do this?


    The drives; it's Dutch...schijf 0 is drive 0 and schijf 2 is drive 2.
    Attached Thumbnails Attached Thumbnails Boot sector on the wrong drive-drives.png  
      My Computer


  2. Posts : 12,364
    8 Pro x64
       #2

    You'll have to create your boot record using the Recovery Environment.

    Either format the old installation first, the 100mb partition or disconnect the drive with the existing installation before starting. Otherwise the RE will keep writing / creating to the old drive.


    How to use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issues in Windows

    *NB It sometimes takes a few re-boots for Start up repair to fully finish repairing / creating the Boot sector / MBR
      My Computer


  3. Posts : 1,031
    Windows 7 x64
       #3

    The easiest way is to add the boot files to the Win 7 partition on Drive 2. Then mark that partition active and set it so Drive 2 is the primary drive in the bios so that active partition is the first one encountered during boot. This does not mean the drive has to show as drive 0 since that is controlled by the SATA connectors.

    Open an administrative command prompt window and type the following and enter after, then wait for a response.

    bcdboot C:\Windows /s C:

    When you have confirmation, close the command window and use Disk Management to set the C: partition active.

    Since you have several active partitions, if the Win 7 drive is not set first in the boot order it will not boot.

    If you want, the boot file bootmgr and folder boot are hidden system files and can be seen if you set the folder view to see them.

    To open an administrative command prompt type CMD in the Start Menu search box and hit
    CTRL+Shift Enter.
      My Computer

  4.    #4

    Using the Win7 DVD Repair console, you can deactivate the three Active partitions, clean and format Disk 0 and then mark active to recover the System MBR into Win7 partition.

    Boot Win7 DVD, select Repair on second screen, click through to Recovery tools list, open a Command line, type:

    DISKPART
    LIST DISK
    SELECT DISK 0 (confirm this is the old Win7 you want to clean/format)
    CLEAN ALL (zeroes HD, deepest clean, takes awhile)
    Create Partition Logical
    Format
    Select Disk 1 (confirm this is Nintendo HD)
    List partition
    Select partition # (give number for Nintendo)
    Inactive
    Select disk 3 (confirm this is PS2 HD0
    List partition
    Select partition # (give number for PS2 partition)
    Inactive
    Select disk 2 (confirm this is new Win7 HD)
    List partition
    Select partition # (give number for Win7 partition)
    Active
    exit

    Now return to Recovery tools list to run Startup Repair up to 3 separate times with reboots as it will attempt to repair before writing the MBR to Win7.
      My Computer


  5. Posts : 1
    windows 10 64 bits
       #5

    Wow !


    @Saltgrass !!!!!

    Six years later you saved my ass.
    My Windows 10 was failing, not boot/bcd ... now it works.

    thanks.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 00:31.
Find Us