Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can't install 7100

25 Apr 2009   #21
Chappy

Vista Ult 64bit - Windows 7 Ult 7264 64bit
 
 

Yah, if the disk booted and stalled after that it sounds like bad burn and that error in the verification just confirms that. It's either a bad iso image, or just bad burns so far.

I've used ImgBurn with all builds so far with no issues. It's free and the default setup for burning a bootable image is all that's needed so no tweaking of settings is needed.
You can get it Here if you want to try it with that.

Quote:
I should buy a DVD+/-RW for occasions just like this one. Then I can burn it until I get it right.
Nope, won't boot on rewritable media unfortunately.


My System SpecsSystem Spec
.
25 Apr 2009   #22
jimbo45

Linux CENTOS 7 / various Windows OS'es and servers
 
 

Quote   Quote: Originally Posted by lollsiga View Post
There is a txt file on the dvd that contains this "This disc contains a "UDF" file system and requires an operating system that supports the ISO-13346 "UDF" file system specification." Is that the problem? I doubt it.
That IS exactly the problem.

You need to reburn as an ISO. Use UltraISO or imageburn. Forget NERO now its horrible (although you probably didn't use it).

The ISO burn for the boot IS NOT UDF. It should have a proper boot sector and be bootable.

There's NO problem either in using +RW (or -RW) re-writeable media for creating bootable discs -- do it all the time --what with all these builds and some dubious ISO images from bad torrents.

cheers
jimbo
My System SpecsSystem Spec
25 Apr 2009   #23
lollsiga

Windows 7
 
 

Another bad burn... 2 or 3 empty dvds left in the house...

Quote   Quote: Originally Posted by jimbo45 View Post
That IS exactly the problem.

You need to reburn as an ISO. Use UltraISO or imageburn. Forget NERO now its horrible (although you probably didn't use it).

The ISO burn for the boot IS NOT UDF. It should have a proper boot sector and be bootable.

There's NO problem either in using +RW (or -RW) re-writeable media for creating bootable discs -- do it all the time --what with all these builds and some dubious ISO images from bad torrents.

cheers
jimbo
I used imgburn now. Are there any special settings I should select?
My System SpecsSystem Spec
.

25 Apr 2009   #24
lollsiga

Windows 7
 
 

I used a dvd from the same batch for the 7000 image and never had a bad burn with them before. Now 3 in a row.
My System SpecsSystem Spec
25 Apr 2009   #25
Maka

Windows 7 Ultimate Build 7100 RC x86/Windows XP SP3 x86 (Dual Boot)
 
 

Quote   Quote: Originally Posted by lollsiga View Post
Another bad burn... 2 or 3 empty dvds left in the house...



I used imgburn now. Are there any special settings I should select?

Burn at 4x would be a good setting.As for the others i usually leave them default.
My System SpecsSystem Spec
25 Apr 2009   #26
lollsiga

Windows 7
 
 

Quote   Quote: Originally Posted by Maka View Post
Burn at 4x would be a good setting.As for the others i usually leave them default.
I set it to 1x, but 3.3x was the lowest it would go.
My System SpecsSystem Spec
25 Apr 2009   #27
Maka

Windows 7 Ultimate Build 7100 RC x86/Windows XP SP3 x86 (Dual Boot)
 
 

Did it work?
My System SpecsSystem Spec
25 Apr 2009   #28
lollsiga

Windows 7
 
 

still burning at 90% then it will verify
My System SpecsSystem Spec
25 Apr 2009   #29
Maka

Windows 7 Ultimate Build 7100 RC x86/Windows XP SP3 x86 (Dual Boot)
 
 

Any errors in the log window yet?
My System SpecsSystem Spec
25 Apr 2009   #30
lollsiga

Windows 7
 
 

ok it burned and verified 100% now I hope this works
My System SpecsSystem Spec
Reply

 Can't install 7100




Thread Tools




Similar help and support threads
Thread Forum
Can not install official RC 7100
After getting the newsletter from Microsoft Technet offering to Download RC link , I downloaded it twice. At the end of download I got the error message " The downloaded file is corrupt and can not be used. If you try to......." Iam already using win 7260 which is working fine. Do I need to...
Installation & Setup
Install Vista SP2 after Windows 7 (7100)
I am trying to load VISTA SP2 to an unallocated partition on my hard drive that already has win 7 installed. I downloaded the 64 bit SP2 vista install DVD through torrents, and poped it in the DVD drive. Since I have an upgrade product key I did a clean install in the unallocated part of the...
General Discussion
windows 7 7100 install error
windows 7 7100 install error please help me windows 7 7100 x86 boot dvd pc but install error message a required cd/DVD drive device driver is missing if you have a driver floppy disk. CD, DVD, or usb flash drive please insert it now
Installation & Setup
it is possible to install win 7 (7100)after it expired?
i wanna know if the window 7 (build 7100) can be installed after it expired date ??
Installation & Setup
install or upgrade to 7100 from 7068
Hi All currently I am using the 7068 version. I would like to try the 7100 version since the 7068 have problem with the mp3 file and audio with too much background. Anyways, my question is simple, should I do the upgrade to 7100 or fresh installation? Thanks:D
Installation & Setup
Can't Install 7100
Hi, First of all: I have upgraded to 7077 some time ago (from win 7). When tried to run rc1 setup via win, got: "Windows could not retrieve information about the disks on this computer." Anyway, if I boot via dvd, it allows me to do a fresh install and/or upgrade. Of course, when...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 07:15.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App