problem in windows 7 :Windows needs the driver for devi

welcome every body

today when i format new computer

i face problem

this problem is

Script:

aWindows cannot be installed to this disk. Windows needs the driver for device [Adaptec AIC-7892 Ultra160 PCI SCSI Card]. Click 'Load Driver' and load the required device driver. 


kind of the computer
I.B.M
x205 eserver




hared disk is SCSI




when i install the windows in stage 2 i dont see any hard drive

and when i make load drive i can't see any drive

Note that the hard is new and working with windows XP ecxllent


just i want to offer the problem to solve it

and share our knowledge

If Windows 7 installer wants you to load the SCSCI device driver in order to see the HD to install, then you'll need to find the driver for that device on the computer/device's SUpport Downloads webpage for your model, unzip it on stick or CD, then browse to it using the "Load Drivers" link on the "Where do you want to Install Win7" screen until the driver is picked up and installed and suddenly the HD appears on the screen.

If there is no Win7 driver, try Vista driver, or as a last resort XP driver.

Is the device showing in BIOS?

Did you run the Win7 Upgrade Advisor to see if the device is able to run in Win7? http://www.microsoft.com/windows/win...e-advisor.aspx

It appears to be a single-chip Adaptec 29160.

There appear to be Win7 drivers for it:

32 bit:

Adaptec - Microsoft Windows 7

64 bit:

Adaptec - Microsoft Windows 7 x64

As stated earlier, unzip the driver's files to a USB stick or CD, load them in at add Load Drivers link on the "Where do you want to install Windows" screen.