Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: W7 RC x64 RAID w/nForce3 chipset

05 May 2009   #1

W7 x64 (I hope)
W7 RC x64 RAID w/nForce3 chipset

Hey all... trying to get windows 7 to install on a nForce3 RAID 0 array and have come to find out that only nForce4 and above are supported?? Is there any workaround for this?

Please let me know!

My System SpecsSystem Spec
02 Oct 2009   #2


i have found a way around installing windows 7 with nforce 3 raid-0 setup. just install windows xp and then run the installation from windows xp and load the drivers from xp, using the raid drivers fron nforce 5.10 unified driver.

my previous attempt to install windows 7 from bootup did not work as it said drivers were not compatible.
My System SpecsSystem Spec

 W7 RC x64 RAID w/nForce3 chipset

Thread Tools

Similar help and support threads
Thread Forum
AMD 950 chipset RAID drivers TRIM support?
Hi guys, Looked all over the place for a definitive answer to this question: Do AMD RAID drivers support TRIM for SSDs within an array, or do they support TRIM for an SSD connected to a SATA port set to RAID but not part of an array, or they do not not support TRIM at all when SSDs ...
Asus M3A / ATI SB600 / ATI Chipset RAID drivers 64-bit
Hi all, This is my first post but after searching the internet trying to find RAID drivers to work with 64-bit Windows 7 when using an Asus M3A motherboard, or another model using the ATI SB600 RAID driver, I have discovered a lot of people are having an issue and are having to use IDE emulation...
nforce3 RAID setup
Hello, Need some help setting up a RAID 0 setup for a spare disc on my Win 7 64 bit system. Asus K8N-E Deluxe motherboard. Win 7 installed on a RAID 0 array running off the Si3114 onboard controller. I have two spare 250gb drives that I attached to the SATA1 and SATA2 ports on the MB, and...
Hardware & Devices
Microsoft listened! nForce3 support!
Looks like Microsoft listened, because with the new 7048 Build they have windows drivers for nforce 3 chipsets, particularly the networking controller that we havent had support for. So glad they were able to get us a driver! :D Not sure if nvidia had anything to do with it since it was not off...
nforce3 cuasing the problem?
Hi I'm still trying to get my Sapphire HD3650 working on 7 but now i'm pretty sure the reason it isn't working is that I am running an nforce3 motherboard? does anyone know of a work around for this, I've had a look on a few sites and it seems that nforce3 just means I cant run an ATi card on...
Graphic Cards

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:28.
Twitter Facebook Google+