New
#11
Tnx, i will try this. I hope that help me to identify this problem.
I have W7 RC1.iso file from trusted source.
Tnx, i will try this. I hope that help me to identify this problem.
I have W7 RC1.iso file from trusted source.
I downloaded HashTab and do what you say. I compare all (crc32,md5,...) and its ok, it show me green :)
I also try to burn .iso with isorecorder. But when i select image and insert empty dvd disk, it show me disk is non-usable cannot use this media. I have Cryaliss dvd media and is 100% blank. I try with other empty media i have and nothing,same thing.
Last edited by calvo86; 11 May 2009 at 11:42.
Have your tried upgrading your bios? it might be set not to recognize that format - name of windows.
I found one ISP that failed to allow Win 7 access to internet, I also found that same ISP failed to allow Windows SE-ME acess. Check your manufacture to see if the bios will accept Win7.
Might be worth visiting the manufacturer of your dvd drive - see if they have a firmware/driver update on the site.
I already downloaded the latest firmware for my dvd drive and install them.
My motherboard is 5 years old soltek kt600c1l and i dont find soltek homepage. But i find a bios update on web, but i dont know how to upgrade/flash bios All i know is, that isnt so easy to do.
Edit: support windows for my mb- Win All, that i found on web.
check an see who makes your BIOS. then use google to
how to flash (American Megatrends Inc) bios. or whom ever makes your Bios.
really is not that hard. read and follow instructions. easy
my instructions for flash my bios:
Step1: download the newer version of your bios.
Step2: Please right click AFUWIN.exe
Step3: Click "Run as administrator".
»Notice
If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.
I find bios update for me. I have 2 files in folder and read me file.
This are instructins how to flash bios:
If i do what i read there, thats must working.Am i right?
Yes, instruction seem to be rather 100%.
If you do not have a floppy you can change that to USB -flash drive, just make sure you have boot to USB set, I have my BOOT order set the following:
1. USB
2. Floppy
3. DVD drive
4. Sata HD
all you need to do then is shut down. insert USB with files then start.
also you will have the option when you flash bios to save the old bios.
I do recommend you save. you can save simular to:
5-12-bios.rom
Yes. I have floopy, i already make a bootable floopy and copy this 2 files on. All i have to do is flash the bios.
˝I do recommend you save. you can save simular to:5-12-bios.rom˝
What you mean with that?
There also should be a place where you can clidk save old bios.
simply name it so you remember which one it is.... some time new bios are junk and not to ones likes.