Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Hauppauge WinTV-HVR-2250 HELP !

06 Oct 2009   #1

Hauppauge WinTV-HVR-2250 HELP !

So I went ahead and purchased a Hauppanuge 2250 Media Center Kit and am having an issue setting up the channels. After having it recognized my remote (which it couldnt) I had to enter in the digits 1 by 1 till it learned my STB remote. Then when it asks to have me change the channel with the remote it came with nothing happens, I could enter in the channel but the "OK/Enter" button doesnt work to switch to the next channel. Doesnt seem like the set top box is recognizing it at all.

Anyway I've been going back and forth with this since this morning used up my tired day - So if anyone has any idea what could be the problem can you send help my way? Thanks in advance

My System SpecsSystem Spec
06 Oct 2009   #2

Windows 7 ultimate 64 bit / XP Home sp3

I just read a review on Newegg that stated that the drivers on the cd are outdated and you need to go to the Hauppage site and download the Win TV7 1.2 or later drivers this includes everything required to make the remote and Ir blaster work properly in media center. He goes on to state that once installed the remote and the IR blaster are reconized perfectly by media center. Here is his post 2nd form top Customer Reviews Of Hauppauge WinTV-HVR-2250 Media Center Kit Dual TV Tuner 1213 PCI-Express x1 Interface - Retail And here is the Hauppage site WinTV-HVR-2250 Support page. I hope this helps since I have read alot of instances where the remotes that come with alot of tv tuners are useless. Good Luck. (edit) Also please go into your user cp and fill in your system specs this will help others help you more throughly. Thanks and welcome to sevenforums. Fabe
My System SpecsSystem Spec

 Hauppauge WinTV-HVR-2250 HELP !

Thread Tools

Similar help and support threads
Thread Forum
BSOD when using Hauppauge 2250 TV Tuner
I was told this would be a better topic for my issue so this has been moved from another thread. So I have a brand new (3 week old) desktop that i am trying to replace my cable with. I have an also brand new Hauppauge 2250 tuner I am trying to install on it. Every time I mange to get it...
BSOD Help and Support
BSOD when using Hauppauge 2250 TV Tuner
So I have a brand new (3 week old) desktop that i am trying to replace my cable with. I have an also brand new Hauppauge 2250 tuner I am trying to install on it. Every time I mange to get it installed it will run for a few minutes and then I get a BSOD of the IRQL not less or equal variety. When...
Hardware & Devices
"tearing" of Clear QAM Hauppauge HVR-2250 only when ONE channel is act
Having an unusual problem with "tearing" when I am watching/recording Clear QAM channels with my HVR-2250/MCE/Windows 7 setup. If I view or record a single channel -- there is significant "noise/tearing" in the video and audio stream -- most noticable on HD channels. When I start a recording and...
Media Center
I need Help! Please help me set up my Hauppauge 2250
This is a lengthy post. Please help. After spending many hours doing research, which was not enough, I went ahead and bought the Hauppauge 2250, when I should have sprung for the Ceton Infinitv. I have become very frustrated when I found out what it can't do. I have decided to quit complaining and...
Media Center
Hauppauge WinTV-HVR-1100 consumes too much CPU resource
Hello, I have been struggling lately with a problem and I hope maybe you can help me: I have recently noticed that my computer's CPU works at 50% even though it's rebooted and no softwares are started (one of the 2 cores is running at full power!). So I tried to look what consumes all this...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:58.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App