Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: WMC tv signal setup

01 Feb 2009   #1
swarfega

Windows 7 Professional 64-bit
 
 
WMC tv signal setup

I think this is related to my other problem with editing registry for GLID etc. Anyway when I try to set up the tv signal it gets as far as Downloading TV setup data and the progress bar doesnt move.


My System SpecsSystem Spec
.
03 Feb 2009   #2
swarfega

Windows 7 Professional 64-bit
 
 

My System SpecsSystem Spec
Reply

 WMC tv signal setup




Thread Tools




Similar help and support threads
Thread Forum
Win7 Starter getting error on initial setup; locked in setup loop
I have several Asus Eee netbooks that I'm getting set up to use at my school. I had some parent volunteers helping me get them ready to deploy, and one of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup. Now when I...
Installation & Setup
BSOD when using WMC during TV Setup during "Examining TV signal"
This has been an ongoing issue when I try to setup my cable cards in Windows Media Center. It downloads the local guide data, then it goes into the "Examining TV Signals" portion of the setup. Sometimes it will just freeze the PC and more commonly, I get a BSOD. I have two different cards. 1....
BSOD Help and Support
Windows 7 Install, Display turns off during setup, no VGA signal
This is boggling my mind and I can't seem to find many solutions to it. I'm working on a Toshiba Tecra A11 w/Nvidia NVS dedicated graphics, new SSD and 8 gb RAM. Laptop and screen power on and I can enter BIOS, Ram+HD detected I start Windows 7 install from USB drive, it does the loading...
Installation & Setup
Tuner Setup - setup loops at accepting Channel Changer
have installed new Haupaugge HVR 2250 turner card and have to set up TV Tuner and confirm remote functions after some driver conflicts i got the card and remote working to control Shaw Digital Box via IR blaster and can see live TV when i'm on the "Test Channel Changing" page - I can see and...
Media Center
WMC and TV Tuner - No Signal / Too Weak a Signal
I have owned several TV Tuners in the past and this is the first OS that has given me problems. I have a Hauppauge WinTV-HVR-1950 (USB 2.0hs) and cannot get a picture from my Cox Cable Service in Orange County, Southern CA. Installed the 64bit driver from Hauppauge. According to Device...
Media Center


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:45.
Twitter Facebook Google+