Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Removing analog channels completely?

14 Nov 2009   #11

Windows7 Ultimate

No, that's not the only option. I can enter a channel number, but there are 3 channels listed under number 2, and so on.

My System SpecsSystem Spec
14 Nov 2009   #12

Not sure what else to tell you...

In windows media center, you can change the "channel" number entered...use WMC>Settings>Guide>Edit Channels>click on a channel, enter channel such as 2221 or 221 for 2.1, depending on your settings.

I am not sure why you would not be able to remove channels, except that you say you are not using the guide..the channels are there, if you enter the associated channel number it will go to that channel - the guide settings can remove unwanted channels from being selected in the guide, but if you manually enter that channel the tv tuner will change to it, even it's white dots and black marks...

I would like to be of more assistance but I am not in your zone so I cannot mimic your setup.

Good luck.

Anyone else have any suggestions for roklipni?
My System SpecsSystem Spec
14 Nov 2009   #13


Have you tried to perform a reset on WMC and then see if you can import only the channels that you want to allow?
My System SpecsSystem Spec

15 Nov 2009   #14

Windows7 Ultimate

Well, I've changed channel numbers, so that they are normal - one for each number. But still, I would like to be able to remove the channels from the channels settings, not just disable them, because it's a big mess in the channel settings.

I'll try preforming a reset and importing the channels I want.
My System SpecsSystem Spec

 Removing analog channels completely?

Thread Tools

Similar help and support threads
Thread Forum
Completely removing Logon and Logoff screens and messages
Hi, I am trying to strip Windows 7 of every single screen and message before login... and before shutdown. So we've got: - Boot sequence - Logon screen - Preparation to Logon - Preparation to Shutdown Boot sequence was easy to completely black out, by using
Adapter: VAG -> Analog ! Which One?
Hi, I'm looking for a Adapter Converter from VGA-to-Analogue to being able to connect my Notebook to the (any) TV (the older ones). TVs usually have one or more of the following input connectors: S-Video Video (cinch) Scart I' found some Adapter:
Hardware & Devices
Why W7 says im in Analog Mode?
I am using W7 Ultimate x64 and I have a MSI R5770 Hawk, and my monitor is a Acer S201HL, they are connected using a DVI-D Single Link cable. When i right click on my desktop and click Change Screen Res. it tells me my display is AcerS201HL(Analog) why is it not digital? sorry if im in the wrong...
Graphic Cards
Completely removing EVERYTHING from an old Hard Drive?
So my uncle let me take apart his really old desktop, and I removed his 2.5" 160GB Hard Drive. I'm going to buy an enclosure for it soon. However, it still has Windows XP installed on it, as well as loads of other things I really don't want on my computer. How can I completely remove everything...
Chillout Room
Removing Vista Boot Completely
Hello Guys, I am new to the forums and I have tried searching for this but I can't find a clear way to do this. I have multiple hard drives (not partitions) on my system. My new RAID-0 SSD has the Windows 7 install on it while my old WD Raptor has my vista boot on it. I have been trying to...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:03.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App