Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 7057 MCE issues...

21 Mar 2009   #1
fgdn17

windows vista
 
 
7057 MCE issues...

since upgrading from 7048 to 7057 my MCE doesn't seem to retain information...when switching from one channel to another(mostly from regular to HD, have dual tuner)..it just locks up and I have to either re-boot and/or re-boot and redo tv signal setups OR remove and reinstall my
cable capture card...anyone else seeing these issues???

Hauppauge Win TV HVR-1250, ATSC/QAM Device


My System SpecsSystem Spec
.
21 Mar 2009   #2
scrooge

win 7 ( 64 bit)
 
 

seems like in this build mce is just really bad . it tells me ( no tunner card installed).
i go into device manager and it says it installed .so i close mce and open it up again
then it finds the tunner. when playing movies/tv shows there is a (play all) button that worked fine with all the other builds. with this one it just hangs and then i have to
use (task manager) to end it.

scrooge
My System SpecsSystem Spec
21 Mar 2009   #3
sandman

Window's 7 Ultimate 64bit
 
 

Mine works great except it loses sync between voice and video or the buffer is screwing it up havn't figured it out for sure sometimes it works great for hours and then it start screwing up. Using HVR1800 get 13 HD channels clear as a bell.
My System SpecsSystem Spec
.

21 Mar 2009   #4
scrooge

win 7 ( 64 bit)
 
 

i hope the next build works better . if not i'll have to go back to build 7048.

scrooge
My System SpecsSystem Spec
22 Mar 2009   #5
johngalt

 

Quote   Quote: Originally Posted by fgdn17 View Post
since upgrading from 7048 to 7057 my MCE doesn't seem to retain information...when switching from one channel to another(mostly from regular to HD, have dual tuner)..it just locks up and I have to either re-boot and/or re-boot and redo tv signal setups OR remove and reinstall my
cable capture card...anyone else seeing these issues???

Hauppauge Win TV HVR-1250, ATSC/QAM Device
Quote   Quote: Originally Posted by scrooge View Post
seems like in this build mce is just really bad . it tells me ( no tunner card installed).
i go into device manager and it says it installed .so i close mce and open it up again
then it finds the tunner. when playing movies/tv shows there is a (play all) button that worked fine with all the other builds. with this one it just hangs and then i have to
use (task manager) to end it.

scrooge
Based upon those 2 comments I am sticking to build 7048.

Quote   Quote: Originally Posted by sandman View Post
Mine works great except it loses sync between voice and video or the buffer is screwing it up havn't figured it out for sure sometimes it works great for hours and then it start screwing up. Using HVR1800 get 13 HD channels clear as a bell.
I have the same card - my video looks horrible, but that is because I am sitting close up to my 22" monitor - from across the room in bed it looks pretty decent. I have also heard that nVidia drivers and Hauppauge cards don't play nicely together....

I *have* noticed, though, that my audio is slightly out of sync from the video on live TV stations feeding in on my analog cable - in fact, I swear that the audio is roughly 250-500 ms faster than the video....

But this has been there since Vista, IIRC....
My System SpecsSystem Spec
23 Mar 2009   #6
Kreigz

Windows 7
 
 

I had this problem alot with Beta 1.


Quote   Quote: Originally Posted by scrooge View Post
seems like in this build mce is just really bad . it tells me ( no tunner card installed).
i go into device manager and it says it installed .so i close mce and open it up again
then it finds the tunner. when playing movies/tv shows there is a (play all) button that worked fine with all the other builds. with this one it just hangs and then i have to
use (task manager) to end it.

scrooge
My System SpecsSystem Spec
23 Mar 2009   #7
Kreigz

Windows 7
 
 
Windows 7 64-bit build 7057 Media Player Library Issues

I'm having a problem with adding directories to MP 12 and I've traced it to Win7 build 7057 (maybe just the version of MP12 contained - I've haven't tracked that build number).

I can add directories to the libraries in the Library view of Explorer, but they do not show up as available in Media Player. If I add them in Media Player, that do not index and show the contents; also, if Media Player is closed and restarted, the ones I added through Media Player are gone from the list.

This is really bugging' me (no pun intended). Win7 build 7048 had a DLNA complaint server able to serve and transcode drv-ms and wtv files straight to my PS3, but had severe memory leak issues (eat up 4 gigs of RAM in about 8 - 10 minutes and restart the video) in the transcoding part. Build 7057 doesn't have the memory leak, but I can't add any of my custom directories to the libraries in Media Player.

I'm pretty convinced of this behavior. I've reinstalled build 7048 and 7057 several times each to confirm these bugs. I imagine it can be fixed with either some Registry change or rights alteration, but I'm stumped and Google'd out.

Any ideas?
My System SpecsSystem Spec
30 Mar 2009   #8
fgdn17

windows vista
 
 

Quote   Quote: Originally Posted by fgdn17 View Post
since upgrading from 7048 to 7057 my MCE doesn't seem to retain information...when switching from one channel to another(mostly from regular to HD, have dual tuner)..it just locks up and I have to either re-boot and/or re-boot and redo tv signal setups OR remove and reinstall my
cable capture card...anyone else seeing these issues???

Hauppauge Win TV HVR-1250, ATSC/QAM Device
upgrading from 7057 to 7068 seems to have corrected this issue...GO DEVELOPERS...GOOD WORK...!!!!
My System SpecsSystem Spec
31 Mar 2009   #9
Kreigz

Windows 7
 
 

Things are look pretty good for me as well: 7068 is a good build.

I do have one problem. I use MP12 to stream MCE recordings out to my PS3. My older recordings, ones in the DVR-MS format work great! They are sorted under series and have the episode name available at the PS3.

However, newer recordings, ones with the wtv format, are not identified by series and are represented by the actual file name, not the episode name or even series name.

Help! Any ideas?
My System SpecsSystem Spec
Reply

 7057 MCE issues...




Thread Tools




Similar help and support threads
Thread Forum
bsplayer issues with build 7057
Might be worth your while looking at the 'free compatible software for Windows 7' section in this forum, and rather install and run some of them. Like, Avast for your antivirus, Malwarebytes anti malware and VLC media player.
Software
7057 x64 Broadcom wireless issues
After my kid went to some less-than-savory websites, my PC at home was infested with a slew of viruses. I figured it was time to install 7057 since I had such good luck with 7000 on my netbook. I installed and everything appeared to be fine, but then, using the Microsoft provided Broadcom...
Network & Sharing
Windows Media Player 12.0.7057.0 Original Files from Windows 7 Build 7057
Dear all i found something interesting in google search . wana share with you . Windows 7 Build 7057 32-bit and 64-bit getting leaked. As of now build 7057 is closest Windows 7 RC Build and has many changes like new wallpaper, user account pictures and most interesting part is you can now remove...
Customization
7057 x64 install issues and lockups
I know many are having issues, but wondering if there is anything common that could help. First off, these are all clean install attempts and not upgrades. I have the Asus P6T Deluxe with the Core I7 920 processor and 6gb of ram with the Nvidia Geforce 9800+ graphics card. WD 640GB SATA HD which...
Installation & Setup
Interface issues in 7057
I just upgraded to 7057 and now seek bar in Media Player Classic is messed up. http://www.picamatic.com/show/2009/03/15/09/07/2836190_419x117.jpg Reinstalling MPC and video drivers (I have nvidia geforce 7600GT) doesn't help. Only when I disable desktop composition it works normal. What...
General Discussion
Build 7057 MTU issues
i have been playing with windows 7 since i installed and found upload speed just terrible down load is good computer to computer is good but upload to net is max of 11 kbs i have an oem Ralink wireless card and its the same network for all i did a few tests and was told that MTU discovery was off...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:14.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App