Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: an unusual problem regarding tv tuners/wmc

26 May 2010   #1

Windows 7
an unusual problem regarding tv tuners/wmc

Hello all, I'll try to make this make as much sense as possible.

I bought a tv tuner that doesn't pick up everything my television picks up. I have a cable subscription that is delivered to my apartment via coaxial cable.

Now, here's where the unusuality comes in.

Even though I am only paying for basic cable, I get many, many channels that I don't think are part of the basic package (ESPN/ESPN2/TLC/etc). My hdtv picks these channels up when I have the coaxial simply plugged into my television (no cable box). However, these channels are found on places like 102.410, 55.1241, etc.

Is it possible to pick those up with a tv tuner? I recently bought this one: - AVerMedia AVerTVHD Duet - PCTV Tuner (A188 - White Box) - TV Tuners & Video Devices
and it picks up my channels like 7.1 (abc hd) 5.1 (fox hd) and the like, but does not pick up anything past channel 50 or so.

Is it possible to pick up the 102.410s of the world with a tv tuner? What type would I need? Is there some key information that I am not understanding? The requested channels ARE digital, yes? Because I noticed my card does not pick up NTSC, but that shouldn't be an issue, right?

Thanks much.

My System SpecsSystem Spec
26 May 2010   #2
Crunchy Doodle

Windows 7 Ultimate x64

Your tuner is a QAM tuner and should get all the unencrypted digital channels coming over your basic cable connection. Your TV has a QAM tuner also, so you should be able to get all the same channels. There are a few caveats. I don't believe Windows 7 Media Center can tune to a four digit subchannel like 55.1241. I'm pretty sure we are limited to three digits each for the channel and subchannel, such as 102.410. On my Time Warner Cable the channels range from 22.626 to 134.345. There are a few clunkers with four digital subchannels, such as SPIKE 101.8401. The SiliconDust HDHomeRun dual QAM tuner can tune to it with the SiliconDust setup application, but MC7 can't.

Another issue is that TW sends data to our one QAM HDTV set to make the channel numbers it displays more friendly. Often, these are not the actual channel numbers needed in the MC7 TV setup. For example, what the HDTV shows as channel 2.1 (KCBSDT) is actually 82.542. The guide information is at 2.1 - all of which is doable in the MC7 setup. So physically KCBSDT is at 82.542, but I set it to display as 2.1 with the guide listing for KCBSDT. This has to be done manually in the MC7 setup. It takes a while to get used to the idea of physical and virtual channel numbers and how they map to guide listing data. I've done it so many times now, I have most of it memorized. I'm not sure this is a good thing. Search around for discussions on how QAM channel mapping is done.

My System SpecsSystem Spec
26 May 2010   #3

Windows 7

thanks a ton! I found a LOT of the information I was looking for thanks to you!
My System SpecsSystem Spec


 an unusual problem regarding tv tuners/wmc

Thread Tools

Similar help and support threads
Thread Forum
unusual problem I've never encountered before
So lately my pc has been acting up and I have no idea what's going on. So it's been fine all day been running fine and then I went down stairs for dinner watched the seahawks and came back upstairs. I tried listening to a .wav file and I got an execution error. I tried to open firefox to search for...
General Discussion
Unusual Windows 7 PC Problem, Please Help!
Unusual Windows 7 PC Problem, Please Help! I woke up and my computer had restarted itself. When I logged back on I had a ton of problems. I took some screen shots to help explain whats going on. Unknown Extra Space not displayed on my monitor:...
General Discussion
Unusual Problem
In my Program Folder, I have a TEMP Folder (Empty). When I right click and try to delete the folder, I enter a loop with no end. The Pop Window display like it is trying to remove the whole Programs Folder. Any Advice would be appreciated. Thanks.
General Discussion
BSOD Unusual Problem
I have a Windows 7 Home Premium 64x with and ASUS M3N-HD/HDMI motherboard and a Geforece 9800 GTX/9800GTX + graphic card. I also have 8 GB of ram. I have been getting an odd BSOD lately. I have attached the .zip file for you to look at. I am unsure what is causing the problem. It happened when I...
BSOD Help and Support
Unusual Problem - Please Help!
OK so here is the deal. I have a HP Mini 1000 netbook with an eight GB hard drive (other specs aren't important for this discussion). It originally came with Ubuntu, but I wanted to try Windows 7 out on it. So I got a copy from my university's software store and proceeded to figure out how to put...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:56.
Twitter Facebook