Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: I've wrote 10 letters out with different address but MSW2010 Problem.

21 Jan 2012   #1

Windows 7 Pro X64
I've wrote 10 letters out with different address but MSW2010 Problem.

I'm writing 10 letters. They all have the same body but the only different thing is the address.

I wrote one letter out with X address. I pressed save as "Letter1"
I then deleted that address from letter X and wrote another address in the same document for letter Z and named it "Letter2".

I emailed them off to my girlfriend to print and she says all 10 documents feature the same address, even though i have pressed 'Save as' and i can see all of them in my documents are different.

Any idea's why this is happening?


My System SpecsSystem Spec
21 Jan 2012   #2

Windows 7 Pro X64

Yes, I go to File -> Save as.

And 'X' is an eXample of a address. Of course i'm writing in 10 different addresses.
My System SpecsSystem Spec
21 Jan 2012   #3

Windows 7 Pro X64

Problem solved by putting all 10 letters into 1 document and using 10 pages.
My System SpecsSystem Spec

21 Jan 2012   #4

Windows 7 Ultimate SP1 64-Bit

You could also have used Word's mail merge feature, but kudos to you for finding a solution that worked for you.
My System SpecsSystem Spec

 I've wrote 10 letters out with different address but MSW2010 Problem.

Thread Tools

Similar help and support threads
Thread Forum
Problem with NAS and mapping drive letters
Normally I make Vol_1 on my Dlink NAS (DNS-323) mapped to drive J: on my ASUS X99 machiine. This works fine and I have lots of links built into my spreadsheets, word documents, etc that all reference J as vol_1 in many links. Every since I built this machine with Win 7 Pro 64bit, it has a nasty...
Network & Sharing
IP address problem...
Hey it's me Cris1, I recently fixed my internet problem about the bridge mode thingy , I was going to portfoward a game so it can use it's full compatibility but I can't access the router webpage , I did run cmd (Command Prompt) then typed ipconfig , then entered the default gateway into the...
Network & Sharing
Problem MOVING files across drive letters.
I have a problem when I am moving files via explorer from one drive to another (right click, MOVE) and while the file copies, it appears to remain in the source directory. If I move a file to the SAME drive, the file moves without issue. If I try to move the file across different drives a second...
General Discussion
Hard drive assigned letters problem
Hi new and first time here., and I need help please. I have several hard drives to storage photos and other media files. I found that the letters assigned in two of the hard drives are difeferent drive_K (M) drive_m (Z) orginal this was drive_m (K) I tried to change the (K) to "Z...
Hardware & Devices
What If Dr. Seuss Wrote Technical Documentation?
Here's an easy game to play. Here's an easy thing to say: If a packet hits a pocket on a socket on a port, And the bus is interrupted as a very last resort, And the address of the memory makes your floppy disk abort, Then the socket packet pocket has an error to report! If your cursor finds a...
Chillout Room

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 18:13.
Twitter Facebook Google+