Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: How do delete scenes from a mp4/mkv/etc while keeping the subtitles...

28 Nov 2015   #11

Windows 7 Home Premium 64 bit
No...The noise is quiter this time....With Handbrake...

Quote   Quote: Originally Posted by Layback Bear View Post
fahadhum do you or do you not still have the noise?

Are you or are you not still concerned with the noise?
The noise is no longer there.By using handbrake (as apposed to Hard-coding subtitles via VLC ) , A VERY LIGHT NOISE comes out which doesn't seems to be a problem.

Also,i just realized a few days earlier that i have not cleaned my RIG's inside , PROPERLY i.e v.i.a using a Compressed Air Can or similar.Which i plan to do tomorrow.

I bought my System in like , February & i tried to clean it using my own blown air :) or using some cloth.But of course , that is not enough.And there will be dust in many unreachable corners of the system.

I am really not that concerned after installing this Corsair FAN ..Trust me , the stock Fan was not good.good. Cuz my system's case was burning after i was done GAMING.But not anymore.May be , it is also due to the fact that i do not keep my system in a closed space.I am using my Mom's Table space just to give roam for my 32 inch LED LCD T.V which i can not use on the same computer table with my RIG :)
(Kindly see the attached Picture)

Attached Thumbnails
How do delete scenes from a mp4/mkv/etc while keeping the subtitles...-1.jpg  
My System SpecsSystem Spec
28 Nov 2015   #12

Windows 7 Home Premium 64 bit
Good news , This time....

Quote   Quote: Originally Posted by fahadhum View Post
Quote   Quote: Originally Posted by wasnotwas View Post
Handbrake settings suggestions -

picture tab -
anamorphic none (ie square pixels), keep aspect ratio = output file has same pixel size

video tab -
quality to R = less compression (larger filesize), quality to L = more compression (smaller filesize)
or set bitrate - R click original file > properties > details > check bitrate > set new bitrate to same value
and 2 pass, turbo 1st pass

audio -
mixdown = stereo
Will convert again with these settings & let you know....
Well , after applying your settings.The results are satisfactory.As the Original File Size of the Movie File that i converted for testing was 1.35 GB & the resulting output Movie File size is 1.46 GB.

However ..huh ...I saw some drop in the video quality.I am the kind of guy who likes to keep things in a NEXT TO PERFECT QUALITY :) Call me weird.But that's how i am.

I noticed the drop and trust me , i can tell.The facial features of the actors in the movie as well as of the objects and things in the movie were choppy (slightly).

I then opened the original Movie File and i quickly noticed the difference....
My System SpecsSystem Spec
29 Nov 2015   #13

W10 Pro x64, W7 Pro x64 in VMware

Any video conversion will degrade quality to some degree - it's a fact of life. That's why (referring to Avidemux) I mentioned cutting a movie on the I-frames, because no recoding happens.

re: cleaning systems with 'compressed air can' - although commonly known as 'air duster', these aerosols contain liquid hydrocarbons (butane, propane etc) not air. If used upside down or at an angle, liquid may be squirted out which on evaporation causes freezing. This can cause condensation to form on mobo or components, resulting in a short circuit when the pc is powered up. Also the gas should not be inhaled. Air dusters are OK if used sensibly.
My System SpecsSystem Spec

29 Nov 2015   #14

Windows 7 Home Premium 64 bit
I agree.And i appreceate your help...I am grateful...

I have decided not to do hard-coding Subtitles.Since , the video quality will decrease.So,i might as well except my movies like this :)

I appreciate your help and your suggestions certainly proved to be useful.

Regarding the system cleaning thing,i was looking for an alternative to that fancy Compressed Air Can on YouTube.As i couldn't find it in the computer shops near my home & i would have to go to this Big Building with all of the computer shops and related equipment's.

.I thought,what if there are other ways to clean.So,i saw this guy on YouTbe cleaning his system using a STRAW and blowing air through it :)

It looked awesome.So,i tried it myself.And it was useful to , say up to 60%.As there were some hard to reach places (like there was this dusty fan) in my RIG where my own air wasn't penetrating enough.Plus,i don't know how to unscrew the hardware components and screwing them in again.So,i do not risk doing something bad by screwing and unscrewing.So,i pretty much cleaned my RIG.Not that it was really dusty.It's just that i have not cleaned my system thoroughly since i bought it which is like 7 months or so...

I may be trying and sorting out new ways to clean my RIG.Thank you for letting me know the hazards of a Compressed Air Can.If it could be harmful , why try it anyway.I love my RIG and i am not gonna risk damaging anything in it.So,lets see.I may find promising ways to clean the system in future...
My System SpecsSystem Spec
04 Dec 2015   #15

Windows 7 Home Premium 64 bit
I finally found a solution !!!

So,after much trial and error & using different Video Editing Software's such as HANDBRAKE , SMART CUTTER ..

I realized that FREE STUDIO MANAGER had the BEST RESULTS.And no only BEST , it is 100% accurate (in my opinion) when it comes to the final Edited Video file.

When i cut a 4 minutes (Approximately) scene from a movie (While keeping he ORIGINAL FORMAT option selected),the output file's size actually decreased and DID NOT MADE THE MOVIE FILE SIZE BIGGER unlike HANDBRAKE .Plus,their was NO DROP in Video Quality , like NONE (in my opinion)..

So, YAY :) However,now i have to rearrange the Subtitles of the whole movie file.It will not be easy..But at least , now i can delete the UNWANTED & SOMETIMES INAPPROPRIATE SCENES from any film that i want ..

Also, any process of ADDING / PREPARING a Movie file or CUTTING or SAVING the final video file does not take SO MANY MINUTES unlike what happened while using Handbrake..So,this is a SWEEEEET Solution.And,i got to know about this software by someone on seven forums.So,thanks to seven-forums for that as well :)

Thank you all for your suggestions and recommendations ....
My System SpecsSystem Spec

 How do delete scenes from a mp4/mkv/etc while keeping the subtitles...

Thread Tools

Similar help and support threads
Thread Forum
How can i delete / cute scenes from a Movie Files ?
I want to know that how i can i delete / cute scenes from a Movie Files (i.e MP4 , MKV , ETC) . So,that would be like , the movie file will not be damaged , but it will be without those deleted scenes. So,which software or tool do i have to use for this....
Music, Pictures & Video
What is Windows 7 doing behind the scenes
Hi, I have a very old program called Hemera Photo Objects volume 2. The company doesn't exist anymore (I think they were out of business even before vista) Anyway, I do still use the program, so I tried loading it on windows 7 home premium. The program installs actually 2 programs, Hemera photo...
Forign Subtitles Not Displaying Properly (Russian Subtitles)
Hey, this problem has been giving me a headache for days and a million Google searches later: I downloaded subtitles that are Russian (.srt), however when I open up the video file in Windows Media Player or VLC the subtitles are displaying as gibirish, like this: "Король Георг Пятый правит более...
Music, Pictures & Video
Dream Scenes
Hi, I enable Dream Scenes on my computer and I don't know how to disable and uninstall it? How do you uninstall it? Please help.
IE 8 Behind the Scenes: Testing IE
Internet Explorer, like all applications released by Microsoft and other software companies, undergoes immense amounts of rigorous testing before being released in the wild. Given the nature of what IE does (compute, calculate, and render random HTML strings into a coherent pixel mesh that adheres,...

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 23:14.
Twitter Facebook Google+