Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Static IP addresses on multiple adapters simultaneously

02 Aug 2010   #11
dkamm65

Windows 7 Ultimate 64bit
 
 

If I only put only one in the Advanced, it puts me exactly where I when I started.


My System SpecsSystem Spec
.
03 Aug 2010   #12
chev65

Windows 7 Ult, Windows 8.1 Pro,
 
 

Quote   Quote: Originally Posted by dkamm65 View Post
It's still not working.

I click advanced, enter in both IP addresses, and leave one gateway so that it looks like this:


But when I click OK, I get this message:


That's because I already have 192.168.1.100 assigned to my wired internet adapter. Here:


I'm starting to think what I want to accomplish is impossible.
As I mentioned earlier you do not use the IPv4 properties window for any of your connections any longer.

All info for both adaptors needs to go into the TCP/ip window instead.

Having them both connected at the same time may still be problematic.
My System SpecsSystem Spec
03 Aug 2010   #13
dkamm65

Windows 7 Ultimate 64bit
 
 

If I don't in anything in the IPv4 window, the advanced window looks like this and I can't change anything.
My System SpecsSystem Spec
.

03 Aug 2010   #14
chev65

Windows 7 Ult, Windows 8.1 Pro,
 
 

You first need to click where it says "Use the following IP address" in the first window. At that point you will be able to use the "add" button to add your IP's and other info to the second TCP/IP window.

And there is no telling if this will work because TCP/ip is mostly for adding a secondary subnet. Hoping it works for you as I really havn't tried using the TCP/ip window for adding a secondary IP.
My System SpecsSystem Spec
03 Aug 2010   #15
dkamm65

Windows 7 Ultimate 64bit
 
 

I don't want multiple IP addresses for one adapter. I want one static IP for each adapter so I'll have forwarded ports on both wired and wireless.
My System SpecsSystem Spec
03 Aug 2010   #16
chev65

Windows 7 Ult, Windows 8.1 Pro,
 
 

Like I said earlier, I'm not sure if this will work or not. Windows 7 does not like IP's assigned to multiple adaptors at once and this isn't something I can test out on this machine.
My System SpecsSystem Spec
03 Aug 2010   #17
dkamm65

Windows 7 Ultimate 64bit
 
 

Quote:
Oh I know exactly what you want. It's too bad you can't seem to follow the directions though.
Too bad you're not giving me correct directions.
My System SpecsSystem Spec
03 Aug 2010   #18
chev65

Windows 7 Ult, Windows 8.1 Pro,
 
 

Well actually windows does not support the use of multiple adaptors with common gateways on the same system so there are no directions that can help in this case. Although I mentioned this may not work to begin with, I figured you were determined to try anyway so I tried to help.
My System SpecsSystem Spec
03 Aug 2010   #19
fseal

Windows 7 x64 Ultimate
 
 

Back to your original post.

The wording on that error message indicates that either the message is in error or there is a bug in the TPC/IP setup code.

Clearly your are not using the same gateway on "two disjoint networks". The warning should not have even come up at all in that case. I can only assume they throw it up /always/ just in case, but that can be misleading.

Have you tried simply clicking "Yes" to the warning and moving on?
My System SpecsSystem Spec
03 Aug 2010   #20
dkamm65

Windows 7 Ultimate 64bit
 
 

That disconnects me from the internet and brings up the Windows Network Diagnostics window. It tells me it can fix my setting s for me. I click "Apply this Fix", and it's solution was DHCP was not enabled, so it's enabled and it reconnects me to the internet, but it reverts my IPv4 settings to "Obtain an IP address automatically".
My System SpecsSystem Spec
Reply

 Static IP addresses on multiple adapters simultaneously




Thread Tools




Similar help and support threads
Thread Forum
Multiple PCs simultaneously BSOD 0x0000000A
Hi. I have a bit of a situation at a construction site that I support. The guys there decided against having their own internet connection and decided to take up the offer to use the client's network. A cable was put in from a switch on their system to a switch in the site office cabin and...
General Discussion
Assigning static wan ip addresses
Hi, I've just purchased an Asus RT-N66U router and am trying to configure my multiple IP addresses (I have a block of 8, or rather 5 usable IPs) On my previous router I ran the following: :ip ipadd intf=LocalNetwork addr=IP4/29 addroute=enabled :ip ipadd intf=LocalNetwork addr=IP3/29...
Network & Sharing
DHCP and static ip simultaneously, one nic ?
Is it possible to use DHCP dynamic ip and static ip in one nic at the same time ? Like in xp via regedit ? Is it disabled to use them simultanously in win7, one nic? Google is full of "alternative config" suggestions, but they aren't what i'm looking for. (since it is for the "if DHCP...
Network & Sharing
How to assign different ip addresses (static) to different programs
Hey guys, nice to meet you all! I hope I have this thread in the right place but any-ways to my questions. How would I go about assigning different ip addresses (static) to different programs? Ill give you an example of what I mean. There is a Popular game called Minecraft (I don't know if...
Network & Sharing
Networks Shares over multiple network adapters on multiple subnets
I have a pretty elaborate home network consisting of a wired gigabit ethernet primary network and a wireless-N wireless network. everything i have been able to get functioning flawlessly excluding getting the windows shares and ps3 media server i run from a wired windows 7 64-bit server to share...
Network & Sharing
Static IP on wired and wireless adapter simultaneously
I want 2 static IP's, one for my wired and one for my wireless, and they connect through the same gateway (although I am not using them simultaneously). I use the following: Wired: 10.0.0.4 255.255.255.0 10.0.0.1 Wireless: 10.0.0.5 255.255.255.0 10.0.0.1
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:27.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App