Windows Home Server 2008 R2 Vail

Page 1 of 2 12 LastLast

  1. Posts : 1,241
    Windows 7 Profesional x86, Mac OS X 10.6 Snow Leopard
       #1

    Windows Home Server 2008 R2 Vail


    My computer running Windows Home Server Vail (Acer Veritom M464) has been up and running for a while now.

    I've managed to sort out all the problems with it bar one. It refuses to show up on networks unless you look for it manually and type in the IP address etc.

    When I go into device manager the ethernet driver (the one on the motherboard) is installed but there are three (that's all of them) WAN Miniports that refuse to start (IKEv2, L2TP, SSTP).

    I believe the problem may be they are running on 32bit drivers but this is not forté.

    Windows update and the automated driver update thing both throw up the same dodgy drivers.

    Just so you are aware the Ethernet networking driver is an Nvidia nForce one.

    If you require any more information or want me to be more specific please just ask.

    On a related note is anyone aware of a way to add a Windows Home Server Vail (or Just a 2008/R2) shared printer to Mac when the server does not show up in a workgroup.

    Oli

    PS I believe this is my 1000th post (Ironically not on the subject of Windows 7 )
      My Computer


  2. Posts : 128
    Windows 7 Pro. 32 bit
       #2

    Oli,
    How many ports do you have open for those 3 that won't start?
      My Computer


  3. Posts : 1,241
    Windows 7 Profesional x86, Mac OS X 10.6 Snow Leopard
    Thread Starter
       #3

    ITGIRL said:
    Oli,
    How many ports do you have open for those 3 that won't start?
    I honestly don't have a clue, I didn't even configure them. They are just there not working, not letting me do anything with them.

    Oli
      My Computer


  4. Posts : 47
    Windows 7
       #4

    You should try turning off your Windows firewall.
      My Computer


  5. Posts : 1,241
    Windows 7 Profesional x86, Mac OS X 10.6 Snow Leopard
    Thread Starter
       #5

    bigg123 said:
    You should try turning off your Windows firewall.
    It's not that they aren't doing thy're job it's that they won't start with the error 10 message in the driver properties and aren't doing they're job.

    Oli
      My Computer


  6. Posts : 8,870
    Windows 7 Ult, Windows 8.1 Pro,
       #6

    Usually it's A/V software that causes these types of problems but with VAIL being beta and all there are quite a few bugs still to be worked out.

    Maybe this VAIL problem solver will help you find out what the problem is.
    Windows Home Server Code Name "Vail" Beta Forum
      My Computer


  7. Posts : 1,241
    Windows 7 Profesional x86, Mac OS X 10.6 Snow Leopard
    Thread Starter
       #7

    chev65 said:
    Usually it's A/V software that causes these types of problems but with VAIL being beta and all there are quite a few bugs still to be worked out.

    Maybe this VAIL problem solver will help you find out what the problem is.
    Windows Home Server Code Name "Vail" Beta Forum
    Thanks for the link, I'll have a look through.

    Although Vail itself is in beta, the operating system it's based on is not (Server 2008 R2) and I would imagine Microsoft wouldn't change anything (major at least) to do with networking between this and R2; however it could still well be bug.

    Thanks again.

    Oli
      My Computer


  8. Posts : 8,870
    Windows 7 Ult, Windows 8.1 Pro,
       #8

    I was reading through the list of bugs with VAIL and it's long I can tell you that. So many bugs it's crazy but I guess that is the point of this beta release is to get people to report the bugs so they can be fixed.

    There is one strange bug where you need to set the timezone to pacific time before the install "even if your zone is different" otherwise a bunch of strange stuff happens.

    I think I'm going to have to try and download this new server and see what it's all about.

    Thanks for reporting back in Osholt, let me know if you ever get this problem resolved. :)
      My Computer


  9. Posts : 1,241
    Windows 7 Profesional x86, Mac OS X 10.6 Snow Leopard
    Thread Starter
       #9

    chev65 said:
    I was reading through the list of bugs with VAIL and it's long I can tell you that. So many bugs it's crazy but I guess that is the point of this beta release is to get people to report the bugs so they can be fixed.

    There is one strange bug where you need to set the timezone to pacific time before the install "even if your zone is different" otherwise a bunch of strange stuff happens.

    I think I'm going to have to try and download this new server and see what it's all about.

    Thanks for reporting back in Osholt, let me know if you ever get this problem resolved. :)
    I will, I experienced that bug (I'm on installation 3.0 because of it ).

    It's a great OS, just make sure you have enough HDD space and that you have 64 bit Windows 7/Vista drivers for the system you install it on.

    Oli
      My Computer


  10. Posts : 8,870
    Windows 7 Ult, Windows 8.1 Pro,
       #10

    Sounds good osholt, I'm in the process of installing an SSD into my main rig so I can use one of my two 250GB drives in my Dell machine that will soon have VAIL installed on it.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 19:23.
Find Us