Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Cant get into wireless properties tab!! Please help!!

23 May 2009   #1
mob4life

win7
 
 
Cant get into wireless properties tab!! Please help!!

[IMG]file:///C:/Users/Sal/AppData/Local/Temp/moz-screenshot.jpg[/IMG][IMG]file:///C:/Users/Sal/AppData/Local/Temp/moz-screenshot-1.jpg[/IMG][IMG]file:///C:/Users/Sal/AppData/Local/Temp/moz-screenshot-2.jpg[/IMG][IMG]file:///C:/Users/Sal/AppData/Local/Temp/moz-screenshot-3.jpg[/IMG]hey im having a major issue that i know someone can fix!!

Please help!!

i just need to get into the properties tab that is grayed out. here is a screen shot.


what can i do to get access to this??




Attached Thumbnails
Cant get into wireless properties tab!! Please help!!-error.png  
My System SpecsSystem Spec
.
23 May 2009   #2
mob4life

win7
 
 

i still cant figure this out. i dont know if its something to do with administrator or what. i am the only person that uses this computer so i really dont know what else to do.
My System SpecsSystem Spec
23 May 2009   #3
limneos

Windows 7 RC 7100 32bit/64bit
 
 

hello mob4life...

It's nothing you're doing wrong, this option is just not available.
In Windows 7 (and probably on Vista too, or even earlier versions) the Properties option is not available for "Client for Microsoft Networks"... What exactly are you trying to change? no matter what it is, it's not editable from in there...Remember, workgroup and domain settings are not being set through there anymore...
My System SpecsSystem Spec
.

23 May 2009   #4
Orbital Shark

 
 

Hi mob4life, welcome to the forums.

The 'Client for Microsoft networks' is not a changeable device. Only the IPv4 & IPv6 can be changed.
My System SpecsSystem Spec
23 May 2009   #5
mob4life

win7
 
 

Thanks for the reply. Im trying to forward ports and the step im on requires me to set up a static IP address. im following instructions posted here http://www. portforward.com/networking/static-vista.htm

i put 2 spaces after www.

is there another way to do that?
My System SpecsSystem Spec
23 May 2009   #6
limneos

Windows 7 RC 7100 32bit/64bit
 
 

In order to setup a static IP, you need to open the IPV4 properties , not the Client for Microsoft Networks one.

Select Internet Protocol Version 4 TCP/IP , click on properties and there you should be able to follow the guide you have.
My System SpecsSystem Spec
23 May 2009   #7
Orbital Shark

 
 

You can clearly see that they mean the IPv4 from the screenshot in step #10, they just leave out that small detail in step #9.

It should read 'Highlight Internet Protocol Version 4 (TCP/IPv4) then click the Properties button blah blah'

It's clearly their fault

update, actually the guide is correct but they need to word it better, that's why it's a free guide LOL
My System SpecsSystem Spec
23 May 2009   #8
mob4life

win7
 
 

ok so i followed all of the steps then i went back to the port forwarding part and now its saying enter the static IP address u just made 192.168.2.__ (__ represents where im supposed to put my static IP) I went back to cmd and ran ipconfig/all but i didnt see static IP. where can i find that? sorry if this is no longer related to win7
My System SpecsSystem Spec
Reply

 Cant get into wireless properties tab!! Please help!!




Thread Tools




Similar help and support threads
Thread Forum
Need help with properties!
EDIT: Somehow the tab that was missing has started to appear again, don't know how because I haven't done anything but it's back anyway! I recently re-installed windows 7 ultimate, the same I had the last time on my computer. But I noticed one thing. Before I re-installed windows, all the...
General Discussion
wireless mouse properties not being remembered/activated
I've just replaced my Microsoft Desktop 600 (wired) with the Microsoft Desktop 800 (wireless), the keyboard has no problems, but every time I start up the computer the mouse scroll speed is like lightning (unusably fast), and I have to go into control panel/mouse ... but I don't have to change...
Hardware & Devices
Properties
Hi, In Windows Style Builder, how do I change the background color of the Properties window? Rand Marks
Customization
Properties ?
hi guys tried to edit a photo in windows live photo so i could just have my 3 dogs in it , so i cut most of my body off and left the dogs in a widescreen type of picture , this was for my facebook cover photo anyway everytime i try to save the picture it says this phto cannot be saved because of...
Music, Pictures & Video
don't have the "properties" option for wireless network
i'm trying to configure my network to connect automaticaly. i right click the network on the network list, but there is only disconnect and status. there is no "properties" option. on another computer there is. the user is admin and UAC is turned off. F#&^$%:mad:
General Discussion
No Power Management tab in Wireless Properties
Hi, I have the linksys WMP300N wireless card on Win7 32bit. Anyway in the linksys properties there is no power management tab.. I want to uncheck the box that let's windows power down the device. But without the tab I can't. I know it is probably a driver issue for the WMP300N doesn't have the...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:11.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App