New
#1
Routing problem with 2 network cards
Hello,
I have some difficulties managing routes for my network cards. I have 2 network cards, one I use for internet, the other for multicast. Apparently, the current behaviour is that Windows chooses the first card he founds for multicast, and that will be the internet one.
So, my cards are configured like this :
. internet :
IP : 192.168.1.66
mask : 255.255.255.0
gateway : 192.168.1.1 (this is my router)
dns : 192.168.1.1
. multicast :
IP : 192.168.0.2
mask : 255.255.255.0
gateway : empty
dns : empty
The "route print" command shows this :
and interface number for internet card is 11 and 17 for the multicast one.Code:224.0.0.0 240.0.0.0 On-link 192.168.1.66 276 224.0.0.0 240.0.0.0 On-link 192.168.0.2 276
By doing a simple "route delete 224.0.0.0 if 11", I have the behaviour I want. Both internet and multicast. The problem is that this route comes back after reboot.
I tried adding this route :
But after a reboot, the "route print" command shows this :Code:route add 224.0.0.0 mask 240.0.0.0 192.168.1.66 metric 300 if 11 -p
My question is how can I get rid of this route in red that keeps coming back ? And why didn't the added route replace it ?Code:224.0.0.0 240.0.0.0 On-link 192.168.1.66 276 224.0.0.0 240.0.0.0 192.168.1.66 192.168.1.66 320 224.0.0.0 240.0.0.0 On-link 192.168.0.2 276
Thanks for your help !
PS : Every route command has been executed in an elevated command prompt.