Help me to use full speed my WiFi connection ( WLAN)


  1. killer bee
    Posts : 406
    windows7 Ultimate SP1 x32bit
       New #1

    Help me to use full speed my WiFi connection ( WLAN)


    I have 135Mbps link speed support ADSL WI-FI router. I have enabled 802.11b+g+n wireless mode and use 20+40 MHz on my router. I use "WAP-PSK" authentication. In addition to that, have a 2.4 & 5 GHz frequency support router and client device.

    But my network connection display (WLAN) I have a 54Mbps link speed, why is that? How do I use 135Mbps or at least 100Mbps link speed? Is it a some configuration issue? My Ethernet connection show full speed (100Mbps).

    (I'm not talking about my internet connection speed).
    Last edited by killer bee; 27 Dec 2012 at 09:55.
      My Computer
    Quote Quote

  3. Duzzy
    Posts : 640
    Windows 7 Ultimate x64
       New #2

    Brand and model of the router and the wifi card or usb thats in your PC might help, thanks.
      My Computer
    Quote Quote

  4. LuzTeTT
    Posts : 256
    Windows 8 Pro x64
       New #3

    IEEE 802.11 - Wikipedia, the free encyclopedia

    It looks like your device is running at 802.11g and nothing further.
      My Computer
    Quote Quote

  6. kbrady1979
    Posts : 2,973
    Windows 7 Professional 64bit SP1
       New #4

    People look at advertised speeds and think that is what they should get, when in fact, it is more complicated than that. Different 802.11 standards have different bandwidth capacity and your Wireless LAN will only run as fast as its lowest 802.11 standard, eg. 802.11a/b/g/n. What that means is if you have a device that runs off of 802.11g standard, your wireless network will not be able to run any standard above 802.11g. LuzTeTT's comment above is correct.
      My Computer
    Quote Quote

  7. killer bee
    Posts : 406
    windows7 Ultimate SP1 x32bit
    Thread Starter
       New #5

    kbrady1979 said:
    People look at advertised speeds and think that is what they should get, when in fact, it is more complicated than that. Different 802.11 standards have different bandwidth capacity and your Wireless LAN will only run as fast as its lowest 802.11 standard, eg. 802.11a/b/g/n. What that means is if you have a device that runs off of 802.11g standard, your wireless network will not be able to run any standard above 802.11g. LuzTeTT's comment above is correct.
    LuzTeTT said:
    IEEE 802.11 - Wikipedia, the free encyclopedia

    It looks like your device is running at 802.11g and nothing further.
    Thank you friends your replies, after adjust some settings on my router, now I got 72Mbps link speed. Still I'm not received 40GHz connection. I used 802.11b+g+n mode.


    Duzzy said:
    Brand and model of the router and the wifi card or usb thats in your PC might help, thanks.
    Yes friend, I have 802.11n support client device, I think its something a router settings issue. Now I got 72Mbps.
    Last edited by killer bee; 27 Dec 2012 at 09:56.
      My Computer
    Quote Quote

  8. chev65
    Posts : 8,870
    Windows 7 Ult, Windows 8.1 Pro,
       New #6

    killer bee said:
    kbrady1979 said:
    People look at advertised speeds and think that is what they should get, when in fact, it is more complicated than that. Different 802.11 standards have different bandwidth capacity and your Wireless LAN will only run as fast as its lowest 802.11 standard, eg. 802.11a/b/g/n. What that means is if you have a device that runs off of 802.11g standard, your wireless network will not be able to run any standard above 802.11g. LuzTeTT's comment above is correct.
    LuzTeTT said:
    IEEE 802.11 - Wikipedia, the free encyclopedia

    It looks like your device is running at 802.11g and nothing further.
    Thank you friends your replies, after adjust some settings on my router, now I got 72Mbps link speed. Still I'm not received 40GHz connection. I used 802.11b+g+n mode.


    Duzzy said:
    Brand and model of the router and the wifi card or usb thats in your PC might help, thanks.
    Yes friend, I have 802.11n support client device, I think its something a router settings issue. Now I got 72Mbps.
    You need to change over to 802.11n Only mode, this will only work if you don't have any wireless G or below clients that need to connect. Using the mixed modes is what's holding you back

    Channel bonding 20mhz-40mhz is also needed but it does require good signal strength.

    To get the max speed possible you will also want to check out the wireless channels being used in your area then make adjustments to your channels in the routers settings to use channels that aren't being used by any neighbors.

    With 802.11n USB dongle the best you can get is 300Mbps, using a PCI slot NIC up too 450Mbps is possible.

    With the new 802.11ac 1.4Gbs or more is possible.

    This link goes over the process and the required adjustments.
    http://www.eightforums.com/network-s...fi-status.html
      My Computer
    Quote Quote

 

  Related Discussions
I moved into a city that has 1gbps fiber and I got it. I set my computer up to run Ubuntu or Windows 7 in the Ubuntu OS I have full speed, like 980mbps but in Windows I can only get around 370mbps, they informed me that it was a know issue which is why they carry around laptops with Ubuntu instead...
Extremely Slow WLAN Speed
in Network & Sharing

I finally got my WLAN set up and I'm getting ridiculously slow speed according to LAN Speed Test. When I say ridiculously slow I mean like 10 Mbps slow. The router and all of the wireless cards are 802.11n. I have an excellent signal on both computers. I've tried two different routers and it...
Hi guys, I have an Atheros AR9285 WiFi card in my laptop, and the other day, it just became very unstable with the connection and it is giving me very low transfer speeds. I've come to think that a Windows Update replaced the driver in it, how could I fix it, or fix the problem? Thanks alot...
wifi connection speed slow.
in Network & Sharing

I have a Wireless N network card on my pc and i have a wireless N router (not N certified) and i'm getting a connection speed of 48.0 mbps. I believe this is slower than wireless G. My network card is Realtek RTL8190 wireless (came with my computer) and i have a Linksys WRT120N wireless N router. I...
WLAN speed?
in Network & Sharing

Hi all Before I installed Win7, I was running XP and I had a wireless LAN utility that allowed me to see real time WLAN speed. Now the only info I can see is that my wireless link runs at 54Mb/s (given it's a draft-n network, it should run faster...) but I would like to be able to see what...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 17:46.
Find Us