Connected to network but no internet access

boarbaboon said:

Hi All

Thanks for the help the problem has now been fixed i followed the quoted instructions below and it seems to have worked. Although at first it did'nt work but i think a router restart sorted it.

Thanks for the help

chev65 said:

You should run this tunnel adaptor remover first. Too many of these indicates a driver problem and it will also ruin your connection if there are too many of those tunnel adaptors. This problem happens all the time. Click and save the zip file, then run the zip file and reboot.

Just use Tunnel Adapter – Microsoft 6to4 adapter Remover
http://www.sordum.com/deneme/6to4/do...to4remover.zip

Yes those pesky tunnel adaptors will do this sort of thing. I'm glad the zip file worked for you, it's easier than delating them one at a time.

I guess your router was hosed by the extra adaptors also, probably was overloaded along with your network connection. The problem may occur again if you don't clean up your connections and make sure you have the correct drivers installed.

Glad you have it working boarbaboon. :)

boarbaboon said:

Hi All

Thanks for the help the problem has now been fixed i followed the quoted instructions below and it seems to have worked. Although at first it did'nt work but i think a router restart sorted it.

Thanks for the help

chev65 said:

You should run this tunnel adaptor remover first. Too many of these indicates a driver problem and it will also ruin your connection if there are too many of those tunnel adaptors. This problem happens all the time. Click and save the zip file, then run the zip file and reboot.

Just use Tunnel Adapter – Microsoft 6to4 adapter Remover
http://www.sordum.com/deneme/6to4/do...to4remover.zip

i had the same success with that tunnel adapter thing. thank you so much!