Can see the homegroup but cannot join it


  1. Posts : 2
    Windows 7 Home Premium 32bit and 64bit
       #1

    Can see the homegroup but cannot join it


    I have three computers in my home network:

    2 are running Win7 Home Premium 32bit edition &
    1 is running Win7 Home Premium 64bit editions

    One of 32bits was an upgrade from Vista and the two others were clean installs. I created the homegroup on the 64bit machine and I was able to join the homegroup from one of the 32bit(clean install) machines. However, the other 32bit machine is able to see the homegroup but cannot join. Based on the various thread on forum here is some additional piece of infromation on the machine that cannot connect:
    1) I removed Norton 360 from the machine. It is now running Microsoft Security Essentails just like the other two machines. Created the homegroup times 3 after removing Norton 360 ver 4, with no luck.
    2) I can see teh other two machines over the Network and even share resources(not through the homegroup)
    3) Connects to network wirelessly
    4) Has a fixed IP address.

    I have done all the recommeded troubleshooting synchronizing time, Network Type is "Home", Network Discovery is on etc.

    Please advice.

    Thanks
      My Computer


  2. Posts : 8,870
    Windows 7 Ult, Windows 8.1 Pro,
       #2

    On the machine that wasn't a clean install, can you please run the batch file below on that machine.

    Try running this batch file which will reset winsock, reset the TCP/IP stack and release renew your IP.


    Download Renew IP + Reset Winsock Batch File

    After that can you please post a screen shot of your ipconfig /all from the problem machine.

      My Computer


  3. Posts : 2
    Windows 7 Home Premium 32bit and 64bit
    Thread Starter
       #3

    I ran the batch file. However, it intialized by Adapter Properties too. I setup the IP address, Mask, Gateway and DNS server before I ran the ipconfig /all. Below are the results:

    Windows IP Configuration
    Host Name . . . . . . . . . . . . : Ashni-PC
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No
    Ethernet adapter Local Area Connection:
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Realtek RTL8101E Family PCI-E Fast Ethernet NIC (NDIS 6.20)
    Physical Address. . . . . . . . . : 00-1D-60-12-BE-37
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80::10d6:df0e:40c3:b9f9%10(Preferred)
    IPv4 Address. . . . . . . . . . . : 192.168.1.200(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.1
    DHCPv6 IAID . . . . . . . . . . . : 201334112
    DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-0F-35-8B-00-00-1D-60-12-BE-37
    DNS Servers . . . . . . . . . . . : 192.168.1.1
    NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter isatap.{C51646CD-304B-4859-8434-93FDC6EA293F}:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft ISATAP Adapter
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:caa:1573:52ba:3b48(Preferred)
    Link-local IPv6 Address . . . . . : fe80::caa:1573:52ba:3b48%12(Preferred)
    Default Gateway . . . . . . . . . : ::
    NetBIOS over Tcpip. . . . . . . . : Disabled


    I have tried to join the Homegroup after running the batch file, the machine still fails to connect.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 09:35.
Find Us