How to set up a Remote Desktop Web Connection?

cyberpine said:

Mojo567.

Thank you!

I followed your guide. I'm running Windows 7 Pro. I already had RDP working over the default port 3389 port.

I configured as you stated, did IP forwarding for the new port and opened that port in the firewall.

From the station itself I can connected via IE!

From the outside, I do get the connection screen and prompt for what server and login. But I get this error when I attemp to log in:

The client could not connect to the remote computer. Remote connectinos might not be enabled or the computer might be too busy to accept new connections. It is also possible that network problems are prevent your connnection. Pleae try and connect again later.


http://support.microsoft.com/kb/284931
On windows 7, looking at Programs and Features under IIS .. I don't see a remote web desktop connection underWWW Services.

Have you done THIS

On your HOME router port forward 3389 to the internal Lan address of the computer you want to connect to.


For example you need to port forward 3389 to say 192.168.2.11


This will be done IN THE ROUTER ITSELF.


Now in your REMOTE BROWSER you need to enter the following type of URL

http://Remote computer IP address or domain name/tsweb/.


As activeX is used I think you can only use IE. FF won't work.

Cheers
jimbo

mojo567 said:

I am glad you asked this question. I had a hard time getting this to work on Vista Ultimate. But it did work. Here are the instructions. They work on Windows 7 Ultimate edition (64 bit).

1. Go to Control Panel, Programs and Features, Turn Windows features on or
off

2. Go to Internet Information Services and select the check boxes for Web
Management Tools and World Wide Web Services. [Web Management Tools
installs IIS 6.0 which is needed for the following download; there is also
some feature in World Wide Web Services that is needed, but I haven't
isolated it yet, so select everything for now]

3. Install tswebsetup.exe from
http://www.microsoft.com/downloads/d...DisplayLang=en

4. Go to C: Program Data, Microsoft, Windows, Start Menu, Programs,
Administrative Tools, Internet Information Services (IIS) Manager [NOT IIS
6.0 Manager]

5. Expand your computer name, expand Web Sites and click on Default Web
Site

6. On the right side of the screen under Edit Site, click Bindings

7. Click on the web site and click Edit

8. Change the port number to your preferred port designation

9. Under Manage Server on the same screen, Start the service

10. Set-up your router and firewall to accept your designated port

AND YOU'RE DONE! [although you might first want to change your Desktop
Background from a DreamScene if you're running one]

To connect from a remote computer, go to http:// IP addressort no/tsweb
and you'll get the Windows Server screen followed by your Vista password
screen

Please help, I'm stuck on step #4, can you please elaborate alittle bit more on this step? thanks.