Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Cannot get Internet connectivity on wired router.

28 Jun 2009   #11
Snufffed

 

From what I can see your version for some reason did not get a NEW IP for Win7.

now you can do this. normally it corrects my customers setup.
1. start --> cmd (run as admin) in popup. type ipconfig /renew
wait for popup.
2. unplug your router for for 2 min, then replug.

wait for a bit while your (icon) in the taskbar goes from RED to yellow to approved.

PPPOE is a piece of CRAP. and many times fails to reset the IP correctly.
once you have the IP set for Win7 and your other OS. 99% of the time it will reset automatically.


My System SpecsSystem Spec
.
28 Jun 2009   #12
Dastardly

Windows 7
 
 

Okay, perhaps this will help (x's crippled fingers)


Attached Thumbnails
Cannot get Internet connectivity on wired router.-ipinfo.png   Cannot get Internet connectivity on wired router.-moreinfo.png   Cannot get Internet connectivity on wired router.-page1.png  
Attached Images
Cannot get Internet connectivity on wired router.-page2.png 
My System SpecsSystem Spec
28 Jun 2009   #13
zigzag3143

Win 8 Release candidate 8400
 
 
ip problem

Quote   Quote: Originally Posted by Dastardly View Post
Okay, perhaps this will help (x's crippled fingers)
Two things I see. First snuffy is right you should renew your lease, then reboot the router, then the pc's. You may have to install then re-install networking but only as a last step.

Let us know how its going. Im subscribed to this thread so everytime something is posted I get email

Ken
My System SpecsSystem Spec
.

28 Jun 2009   #14
Dastardly

Windows 7
 
 
Been there...done that

Deleted my adapter, let it reinstall... Even put in the Mac addy in IP advanced. When I do the CMD: IPCONFIG /RENEW I still get the following;


Attached Images
Cannot get Internet connectivity on wired router.-cmdresult.png 
My System SpecsSystem Spec
28 Jun 2009   #15
zigzag3143

Win 8 Release candidate 8400
 
 
Ip problem

Quote   Quote: Originally Posted by Dastardly View Post
Deleted my adapter, let it reinstall... Even put in the Mac addy in IP advanced. When I do the CMD: IPCONFIG /RENEW I still get the following;
Just out of curiosity, what nic are you using? have you tried re-installing the driver?

We have to create another connection to the internet, then kill the ppoe one.

We are gonna worry this one till its fixed.

Ken
My System SpecsSystem Spec
28 Jun 2009   #16
Dastardly

Windows 7
 
 

Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet controller
My System SpecsSystem Spec
29 Jun 2009   #17
OEM

OS3.5
 
 

It appears to be connecting to the router, but not the internet. So, I don't think its your network card connection. Try typing this in your web browser address bar then hit enter:
Code:
http://192.168.100.1
it should log you onto your Modem if it is connected properly to your network. All I want to know is if it connects or if you get the address not found window. If that does not log you on, try unplugging the modem and router AC power, disconnect wired connection from PC to router, then power up the modem first and wait for all the lights to come on, then power on the router and wait for it to complete, then connect PC(s). Try and surf web.

One other thing you can try is connecting the PC directly to the modem and see if it connects to web.

Lastly, and I hate suggesting stupid stuff like this, but this has happened to me. Have you set a firewall/internet security to block all network traffic???
My System SpecsSystem Spec
29 Jun 2009   #18
zigzag3143

Win 8 Release candidate 8400
 
 
no connectivity

Quote   Quote: Originally Posted by Dastardly View Post
Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet controller
While I was looking thru the thread I noticed in pic 4 from yesterday that the troubleshooter generated two reports. if you could run the troubleshooter again and upload the diagnostic reports it generated I would be happy to have a look

Ken
My System SpecsSystem Spec
29 Jun 2009   #19
Snufffed

 

That adapter is exactly the same as in my ACER LAPTOP.
I also have PPPOE. my method.
1. open network and sharing
2. setup a connection
3. follow the instructions and when ask insert your log name then pass
once complete finished if it does not go from RED to yellow and connect.
start --> cmd (right click run as admin) popup
type ipconfig /renew

then watch the icon in taskbar, ( you did click so it will show)?
it should then turn blue showing connection allowed.
move your mouse over the icon and it will show what ever name you named your iinternet connection. some times i says unknown access point , that alwys goes away after I reboot.

PS: the very first time I have not had to setup my connection was when I upgraded to 7260-RTM
My System SpecsSystem Spec
Reply

 Cannot get Internet connectivity on wired router.




Thread Tools




Similar help and support threads
Thread Forum
reinstall of Windows 7 - Can't connect to internet wired thru router
Hi! I'm Chrissy. I recently reinstalled windows 7. That all went well and I had the desired outcome. One little problem though - no internet. I'm directly connected to my Linksys E2000 router. When I connect the ethernet cable into its Jack, the light comes on. The wireless is working fine (I'm...
Network & Sharing
Internet connectivity problem, affects wired internet but not wireless
I am having Internet connectivity issues that only affect my computer and only affect it when I'm using a wired connection as opposed to a wireless connection. I would just use the wireless except that it's too weak here at my house especially in the room where I'm working and thus it's slow...
Network & Sharing
Can't connect to the internet or my wired Router
Just did a clean windows 7 x64 installation on a build a box computer with a new hard drive. Install went fine. Plugged it in to my 3 month old Linksys Wireless G Broadband Router (WRT54GL) and it doesn't recognize that there is any connection at all. Windows says "No connections are available" and...
Network & Sharing
slow internet when wired to router
Hi I am at my wits end with this problem and am desperately hoping someone here can help. I am running windows 7 home premium 64 bit on a new AMD Quad core system (AMD Athlon II x 4 630 processors). I have 4Gb of ram with a gigabyte motherboard and nvidia ethernet controller and Ralink wireless...
Network & Sharing
"Unidentified Network" with No Connectivity to Router or Internet
Two day ago I was streaming video to JTV when suddenly my computer froze. I immediately knew it was strange because the computer did not respond to mouse movement or ctrl+alt+del, which has never happened before in the 4 years of owning this rig. I proceeded to reboot the computer and found that...
Network & Sharing
Best wireless router to replace my wired router
I'm currently connected to the internet via a Linksys router that is wired only.What i need to know is what is the best wireless router available at this time that i can get to replace my current wired router based on your own experiences with wireless.There are two computers and an xbox 360 on my...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:01.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App