Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: error 651

25 Feb 2011   #1

WIN 7 Ultimate x64
error 651

I have a network setup on my Belkin router with a couple of XP Home machines and one Win 7 Ultimate x64. Works fine. Now my Sister is visiting me with her Eeepc, 1015PE, Win 7 starter x32 and I can not get her connected. I get error 651. When I look this up I see a recommendation to upgrade my router firmware. This I will not do lightly for fear of "bricking" another router.
Been there, done that.

I do not see where this is necessary anyway as my Win 7 Ultimate works OK.

I can not get this Win Starter machine connected wireless (hotel style) or wired. Error 651 all the time.
Can not connect to router with HTTP://
as I do with the other computers. I have stumbled around and changed the unknown network to MSHOME as on the other computers but still have the X between the network and the internet. I have not set up Win 7 Homegroup as I believe that would not allow me to connect to my XP computers.

My Sister did not bring her installation disks with her
so I will try to reload a NIC driver from some other source as my next step. As soon as I discover her NIC model.

Another piece of info. I have another Eeepc with XP home connecting fine.

After trying a couple of days I am ready for help from my fellow enthusiasts....... Please


My System SpecsSystem Spec
27 Feb 2011   #2

WIN 7 Ultimate x64

Hi cyanna !!

This morning I had two responses to this thread. Now they are gone. Fortunately I read yours earlier.

I followed your suggestions but still no joy. The router is set up for DHCP with enough of an IP pool to cover all my computers. Ipv6 is ticked off.
Still could not connect or talk to the router.

I remember that a few months ago I had to use a static IP for my Win 7 Ultimate to get a LAN connection and get to the internet. So I tried a static address for this Win 7 Starter computer and now I can see my other Win 7 computer online. And I can talk to the router from the Starter computer. Still can't see the XP computers on the LAN nor can I connect to the internet.

Looking at the LAN from the W7 Ultimate computer
I see all the computers and notice the Win 7 Starter is on WORKGROUP and not on MSHOME as all other computers are.

Tried to change the Win7 starter computer to MSHOME. Can not rename it that even though a box comes up inviting me to rename. This computer now shows it is on an unnamed, public network. Have not been able to rename or change to home network or to even wipe out HOMEGROUP to start over. Sometimes I think I have got some changes made only to reboot right back to the same old miss-setup.

Tried to type netsh winsock reset in the Command Prompt while signed in as admin with no luck.
Ctrl-Shift-Enter also does not give me the authority.

I have progressed a little. I can now contact the router with the Win 7 Starter computer and can file share between it and the other Win 7 Ultimate computer. Can not see or share with the XP computers and still error 651 for internet access.

As a reminder all my computers are operating correctly on my LAN and have internet connections through my ADSL modem. Only this "guest" Win 7 Starter computer has issues.

Thanks for those suggestions. Got any more?

Regards JIM
My System SpecsSystem Spec

 error 651

Thread Tools

Similar help and support threads
Thread Forum
Burnt out from error error error! Time to go back to Paper.
Hello there. I have been redirected here by jamanji, whom has been most helpful by the way. My PC crashed a little over a week ago. Rather than retype everything, I would like to give you the link to my post. I am not 'Tech' per se, but I would like to try and resolve my problem myself, To...
System Security
Error 41, Error 1001 and error 6008.
Hello there. Recently my computer have just randomly shutdown meanwhile i'm playing games like CS;GO, League of Legends. The screen will just turn black and it will start to make one hell of annoying noise untill it reboots. I've updated all my drivers. Tested my memory. Tested my RAM. Run a...
BSOD Help and Support
Error copying file: Data error (cyclic redundancy check). CRC Scan ?
Edit: Think my hard drive may be failing and was the cause of my file synchronizing crash. I use it mostly to stream music and video and access the hard drive a lot. Any advice thanks HDDStatus - Tool to check hard disk status, health and reliability Hey, I've been using GoodSync for the...
Backup and Restore
BSOD by ntoskrnl.exe, error d1, error 3b, error 1a
I've just install windows 7 home premium 64bit and got 4 times of BSOD. for the first time error code is 0x0000001a for the 2nd time error code is 0x0000003b for the 3rd time error code is 0x0000003b for the 4th time error code is 0x000000d1 I also attach minidump files and text files that...
BSOD Help and Support
Scan Error Error while Scan::0::LEAD Error: Twain source manager no
hi.... i have promblme , i do not know how to fix it.. i have kodak scnners i1220 plus i have RD Web Access the promblme is.. I have a system based on Oracle has been connted with one scanners( i connected with scanners) When i do a scan shows me this a message (Scan Error Error while...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:09.
Twitter Facebook