Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Yes, another post about wireless issues

28 Feb 2009   #11
Cioran

windows 7
 
 
using static ip addresses

Hi limneos:
I upgraded the driver and I still have the problem I would
appreciate if you could help me with the static ip adders. But I have a question, wouldn't that prohibit my PC to connect to other networks ?


My System SpecsSystem Spec
.
28 Feb 2009   #12
darkassain

Windows 7 Ult x64(x2), HomePrem x32(x4), Server 08 (+VM), 08 R2 (VM) , SuSe 11.2 (VM), XP 32 (VM)
 
 

hello Cioran
is this happening after a resume or hiberantion?
because i wrote a tutorial since i had this happening
(when on resume or hibernation i lose internet connectivity....)
if this applies then go here and follow this..
Wireless Connection Workaround for Standby or Hibernation
this will automate the disabling and enabling the adapter and it flush the connections that you had...
and will solve you solution...
My System SpecsSystem Spec
28 Feb 2009   #13
Cioran

windows 7
 
 
is this happening after a resume or hiberantion?

Hi darkassain:
Yes, it happens every time that I put my PC to sleep or log of the internet. Every single time I disconnect from the internet I have to restart my computer to be able to reconnect to the internet.
My System SpecsSystem Spec
.

28 Feb 2009   #14
darkassain

Windows 7 Ult x64(x2), HomePrem x32(x4), Server 08 (+VM), 08 R2 (VM) , SuSe 11.2 (VM), XP 32 (VM)
 
 

Quote   Quote: Originally Posted by Cioran View Post
Hi darkassain:
Yes, it happens every time that I put my PC to sleep or log of the internet. Every single time I disconnect from the internet I have to restart my computer to be able to reconnect to the internet.
well like i said follow the link and instructions.
i found that disabling and renabling the wireless adapter (in network connections, the button outside windows (the the one that disable the adapter but in actually disables the radio (maybe blutooth if you have it) but it does not flush it...
My System SpecsSystem Spec
28 Feb 2009   #15
Cioran

windows 7
 
 

Hi darkassain:
I follow your tutorial and what it did was to permanently disable the network adapter. I re-enable the adapter a try to repeat the steps on the tutorial but it display en error "User_Feed_Synchronization-{22F331E4-F70F-4293D-CBA857C3B2F0} : The task image is corrupted or has been tampered with." I don't know what to do anymore.
My System SpecsSystem Spec
28 Feb 2009   #16
Barman58

Windows 10 Pro x64 x3, Ubuntu
 
 

One other thing to try, if it is possible, is to use WPA2 encryption rather than WEP.

The have been various reports of less than perfect results using WEP with some routers and Windows 7.

May do nothing but has been reported as the fix for WEP connection problems, and it also provides better protection than WEP :)
My System SpecsSystem Spec
28 Feb 2009   #17
darkassain

Windows 7 Ult x64(x2), HomePrem x32(x4), Server 08 (+VM), 08 R2 (VM) , SuSe 11.2 (VM), XP 32 (VM)
 
 

Quote   Quote: Originally Posted by Cioran View Post
Hi darkassain:
I follow your tutorial and what it did was to permanently disable the network adapter. I re-enable the adapter a try to repeat the steps on the tutorial but it display en error "User_Feed_Synchronization-{22F331E4-F70F-4293D-CBA857C3B2F0} : The task image is corrupted or has been tampered with." I don't know what to do anymore.
Cioran the task should make it so that it enables automatically thereby you not having to disable it and enable it....

its weird that you have that message since this these tasks have nothing to do with rss...
try this though


Quote:
Feeds (such as RSS or Atom) may not update properly in the background.

To correct this, open a command prompt and run the following commands:

msfeedssync disable

for /f "tokens=3" %i in ('reg query hkcu\software\microsoft\feeds /v synctask') do schtasks /delete /tn "%i"(If you receive an error, you can safely ignore it and proceed to the next command.)

reg delete hkcu\software\microsoft\feeds /v synctask

msfeedssync enable

You can then confirm that the issue has been fixed by running the following command and confirming a result of SUCCESS:

for /f "tokens=3" %i in ('reg query hkcu\software\microsoft\feeds /v synctask') do schtasks /run /tn "%i"
are you sure your are running a admin privilege account...
also its a little sensitive if you have other accounts running (excluding the one you had logged on before the stanby) and you log on another account...
My System SpecsSystem Spec
01 Mar 2009   #18
Cioran

windows 7
 
 
command prompt

Hi darkassain:
I would like if possible for you to give me instructions on how to use the command prompt and run the code than you suggested for me to use. Thanks in advance.
My System SpecsSystem Spec
01 Mar 2009   #19
darkassain

Windows 7 Ult x64(x2), HomePrem x32(x4), Server 08 (+VM), 08 R2 (VM) , SuSe 11.2 (VM), XP 32 (VM)
 
 

hello cioran you need to run a elevated command prompt

once there type this followed by enter
Code:
msfeedssync disable
then type this exactly as it is written and press enter
Code:
for /f "tokens=3" %i in ('reg query hkcu\software\microsoft\feeds /v synctask') do schtasks /delete /tn "%i"
now type and press enter
Code:
msfeedssync enable
then like i said type this exactly and press enter
Code:
reg delete hkcu\software\microsoft\feeds /v synctask
then finally type this and press enter
Code:
msfeedssync enable
My System SpecsSystem Spec
13 Mar 2009   #20
32dave

windows 7 build 7600 385x86
 
 

also i read that windows 7 doesn't work on 64 bit wep encryption min is 128 i had to change my router
My System SpecsSystem Spec
Reply

 Yes, another post about wireless issues




Thread Tools




Similar help and support threads
Thread Forum
OS deadlock issues persisting post-OS reinstall
So I've been running into this issue within the last month where I'll be either gaming, website browsing, or listening to music, and my PC will stutter for a brief second and then everything will lock up. I won't be able to move my mouse and keyboard stops working. However, the screen doesn't...
BSOD Help and Support
Computer has way too many issues for one title...read post
I have had this computer for about 1 year and since day one i have had numerous issues with it. at completely random times ill get the blue screen of death with 2 main error codes: Memory Management and Crash dump. one time (only once) i got the error code of Bad_code (cant remember if it was code...
Performance & Maintenance
Performance Issues,i tried everything possible(Detailed post)
Hi there,I'm sorry for the general title,but I didn't find a way to put it any better. I'm currently sitting on an Acer Aspire 5830TG with Windows 7 on it,the computer is 9 months old.I will list It's characteristics if needed,but the core is that it has plenty enough specs to NOT have the...
Performance & Maintenance
My first post, Sims 1 issues
Hello everyone, I'm glad to actually have found this community and have heard from a few friends that if you have issues with some PC related things, this is the place to go. But enough flattery on my part, let me get to my issue. I recently went through my CD book and found my old Sims 1 CD....
Gaming
First post... Issues with MBR
Hiya, My first post here. I don't hang out in Windows help forums but when you need them I'm glad they are there!! OK, here's my story. I received my upgrade copy of Windows 7 the other day and couldn't wait to get to the weekend to get it installed and say "bye bye crapy Vista". All was...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:43.
Twitter Facebook Google+