Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Local area connection ip conflict before connect dial up

04 Feb 2012   #11
PooMan UK

Windows 7 Ultimate 64bit

IP conflict with what pal ? This is your local IP address the only thing it could conflict with is units on your local network. If you assign a static IP address on everything using the 192.168.1.X network (X being a different number for each device) then you should never get a conflict. :)

My System SpecsSystem Spec
04 Feb 2012   #12

Microsoft Windows 7 Ultimate 64-bit SP1

Its a DSL connection but i am using as a dial up connection because i have to change my WAN Ip after 5-10 mintues through connect and disconnect a dialup connection. and most of the time it doesn't connect properly it tells ip conflict....

I have only single computer and single internet connection.

My System SpecsSystem Spec
04 Feb 2012   #13

Windows 10 Education 64 bit

I have no idea what you are doing and why you are doing it, and I don't think you know either. Why do you have to change your WAN IP every 5-10 minutes? Why are you in bridged mode? And why don't you just set your PC to use a Dynamic IP? Any IP address starting with is a private IP address. It is on the LAN side of your network not the WAN side. You are messing around with your LAN IP. It is just as well too, because if you were randomly changing your WAN IP and happened to use an IP address already in use, you would knock that user off along with yourself. Your ISP wouldn't like that very much and would soon find out who was doing it. It might be time to contact your ISP before they call you, and get your connection setup correctly.
My System SpecsSystem Spec


 Local area connection ip conflict before connect dial up

Thread Tools

Similar help and support threads
Thread Forum
Local area connection not working - only able to connect wired only
suddenly my wireless internet connection went and it says "local area connection adapter is not connecting properly". My computer model is HP G5120UK and tried to download drivers from the HP website but nothing worked. can anyone help me?
Cannot see Local Area Connection
Newbie here. Someone call tell me what happen??i cannot see Local Area Connection (see picture below) but i can access internet.why this happen..virus or what.tqvm 4 feedback
Network & Sharing
Local Area Connection missing from network adapters, no connection
I have a Windows 7 Home Premium computer that is not connected to the internet. I have checked the drivers and they are all installed correctly and operational. When I go into the adapter settings there is no Local Area Connection adapter. I have included some screen shots of what I am seeing if...
Network & Sharing
no local area connection
Win7 home Premimum 64bit It started with a trojan which is removed but it left a couple of problems. Here is the last one. Device manager shows my lan card. I've tried uninstalling it but its uninstall app messages just never finishes. Network Connection in control panel...
Network & Sharing
Local area connection
Helloo! First post here! My problem is the following: I am already connected to the internet via a Broadband connection, yet my local area connection appears in the list too, saying there is no connection available trough it. I would like to disable the local area connection but still keep my...
Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:14.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App