When connected both ethernet and WiFi, which does it choose?


  1. Posts : 34
    Windows Vista Ultimate 64-bit
       #1

    When connected both ethernet and WiFi, which does it choose?


    How do you know which one is it gonna choose when you're connected with both wired and wireless? Is there some type of "test" it does to take the better connection? Or does it like pick randomly? Alternate?
      My Computer


  2. Posts : 1,167
    Windows 7 Pro with SP1 32bit
       #2

    If you are using the same ISP to connect to the Ethernet and WiFi then you should choose one of them only. Ethernet would be my first choice if the Router is nearby and the computer is not connected by a very long wired cable.
      My Computer


  3. Posts : 2,171
    Windows 7 Ultimate x64
       #3

    rasmasyean said:
    How do you know which one is it gonna choose when you're connected with both wired and wireless? Is there some type of "test" it does to take the better connection? Or does it like pick randomly? Alternate?
    Well, we know the machine knows the maximum speeds of each of the connected networks, but I know it doesn't always pick the one with the highest rated speed. So I think there's some 'smarts' behind it, and recall reading about it before, but can't remember what all it is able to look at.

    I know I've seen preference to a lower speed network, with quite a bit of other traffic on it, even while it had access to a higher speed network with absolutely no current traffic. Then after a little while it decides to use the higher speed network.
      My Computer


  4. Posts : 1,660
    Windows 8 Pro (32-bit)
       #4

    Control Panel\Network and Internet\Network Connections
    I'm pretty sure the order here defines the order used (as that's how Macs do it), but I could be wrong.
      My Computer


  5. Posts : 2,164
    Windows 7 Ultimate 64bit
       #5

    With the laptops I use, when I am on the wireless and then plug in the Ethernet cable, it switches to the Ethernet.
      My Computer


  6. Posts : 640
    Windows 7 Ultimate x64
       #6

    Generally it chooses the fastest adaptor but that's not always the case as sibbil mentioned.

    If you find that it is using a slower adaptor when a faster one is available then under TCP/IP settings for each adaptor there's a checkbox called Automatic Metric the lower number is the preferred network adaptor if not set to auto (I think, might be the higher number) and there is also a metric setting for the Default Gateways if you have more than one Gateway including Gateway's on different adaptors.

    To check which adaptor is being used open Task Manager and check the Network tab.

    I played with the metric settings for another thread and I'm pretty sure this is correct. I don't know if it alternates or pick randomly when set to auto.
      My Computer


  7. Posts : 2
    Windows 7 Enterprise x64
       #7

    If you want to set up manually which adapter will be used, look at metric field: TCP/IP settings > Advanced. Less metric is higher priority. Or you can also use route command line utility for setting up which network interfaces (connections) will be used for different destinations (ip ranges).
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 04:41.
Find Us