Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Network card - Ethernet not plugged in

10 Sep 2009   #101
Mushroom

W 7
 
 

Ok have updated BIOS Firmware/flash thingy.. So hopefully thats all cleared up but now still got the same old NIC problems Zzzz


My System SpecsSystem Spec
.
11 Sep 2009   #102
Loose

windows 7
 
 

Mushroom, had the same problem (drove me nuts!!!) this is what I did. Uninstall all the Realtek divers from control panel, reboot into your bios & disable the built in network chip (check device manager to make sure it's gone) reboot & enable the NIC in your bios. Windows should install the default MS drivers (don't update the drivers) & all should be good until Realtek get thier sh$@!$%% together & give us drivers that work.

Regards Loose
My System SpecsSystem Spec
11 Sep 2009   #103
Mushroom

W 7
 
 

Still getting
Performance power management features on processor 1 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware. although i updated the BIOS which i got from my Motherboard website (evga)

Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x001FBC018609. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.

IRQARB: ACPI BIOS does not contain an IRQ for the device in PCI slot 0, function 0. Please contact your system vendor for technical assistance.

Also took some Screen shots of my Network problem
Network card - Ethernet not plugged in-1.png
Network card - Ethernet not plugged in-2.png
Network card - Ethernet not plugged in-3.png
Network card - Ethernet not plugged in-4.png
Network card - Ethernet not plugged in-5.png


My System SpecsSystem Spec
.

11 Sep 2009   #104
Mushroom

W 7
 
 

I am getting BSOD's now when I'm playing Aion it locks up then says "A clock interval on the second processor was not set with the time interval" something along those lines.. and stupid windows 7 wont let me put the dump file in a zip "Access denied" even though i am the administrator stupid security

Also here is my Cmd ipconfig/all when the Network is Disabled and Enabled
just loving this windows 7 x64 bit network bug Zzz
Network card - Ethernet not plugged in-6.png
Network card - Ethernet not plugged in-7.png


ok that should help the guru's.

also have a look at this lol
Network card - Ethernet not plugged in-8.png


My System SpecsSystem Spec
11 Sep 2009   #105
Lordbob75

Windows 7 Ultimate x64, Mint 9
 
 

Quote   Quote: Originally Posted by Mushroom View Post
I am getting BSOD's now when I'm playing Aion it locks up then says "A clock interval on the second processor was not set with the time interval" something along those lines.. and stupid windows 7 wont let me put the dump file in a zip "Access denied" even though i am the administrator stupid security

Also here is my Cmd ipconfig/all when the Network is Disabled and Enabled
just loving this windows 7 x64 bit network bug Zzz
Attachment 27473
Attachment 27474


ok that should help the guru's.

also have a look at this lol
Attachment 27475
I think you need to reset your CMOS and just clear your mobo out. Sounds like your mobo is messed up. You may want to try another if you can.

~Lordbob
My System SpecsSystem Spec
11 Sep 2009   #106
Mushroom

W 7
 
 

what try a new MOBO? lame.. its brand new only 1 month old but yeah i will try that whole Reset CMOS thing

"just clear your mobo out" ha what? help here commence! haha
My System SpecsSystem Spec
11 Sep 2009   #107
Mushroom

W 7
 
 

Ok well.. Here is THE main example of the problem say for instance my internet is working fine i and i am browsing youtube or something all of a sudden i get the Caution yellow sign thing on my network icon saying no network access but i am still connected to home network(no internet at this point) i start the trouble shooter scan thing and when it gets to the point of saying "reseting the local area network adapter" i get big fat ****ing red X on the network symbol then it pops up with "And ethernet cable is not plugged in or may be broken" sometimes it will "Fix" it self and say i have internet acces but at that point i dont so... W T F

Using NetComm NB5 Plus4 ADSL2 Modem/Router. Reckon that would be the problem? it seems old and the firmware update for it is well.. as old as the modem haha


Hope that made sense trying not to be a pushy ******* here but can i get some quick replies this issue is getting out of hand. And only seems to be caused in windows 7 Thanks
My System SpecsSystem Spec
12 Sep 2009   #108
Zidane24

Windows 7 Home Premium x64 - Mac OS X 10.6.4 x64
 
 

Quote   Quote: Originally Posted by Mushroom View Post
what try a new MOBO? lame.. its brand new only 1 month old but yeah i will try that whole Reset CMOS thing

"just clear your mobo out" ha what? help here commence! haha
if it is the MOBO than you can RMA it can get one that works...don't discredit lordbob's idea as all other known fixes that worked have failed for you.
My System SpecsSystem Spec
12 Sep 2009   #109
Lordbob75

Windows 7 Ultimate x64, Mint 9
 
 

Quote   Quote: Originally Posted by Zidane24 View Post
Quote   Quote: Originally Posted by Mushroom View Post
what try a new MOBO? lame.. its brand new only 1 month old but yeah i will try that whole Reset CMOS thing

"just clear your mobo out" ha what? help here commence! haha
if it is the MOBO than you can RMA it can get one that works...don't discredit lordbob's idea as all other known fixes that worked have failed for you.
I'm still voting for a messed up mobo.

~Lordbob
My System SpecsSystem Spec
12 Sep 2009   #110
Zidane24

Windows 7 Home Premium x64 - Mac OS X 10.6.4 x64
 
 

Quote   Quote: Originally Posted by Lordbob75 View Post
Quote   Quote: Originally Posted by Zidane24 View Post
Quote   Quote: Originally Posted by Mushroom View Post
what try a new MOBO? lame.. its brand new only 1 month old but yeah i will try that whole Reset CMOS thing

"just clear your mobo out" ha what? help here commence! haha
if it is the MOBO than you can RMA it can get one that works...don't discredit lordbob's idea as all other known fixes that worked have failed for you.
I'm still voting for a messed up mobo.

~Lordbob
I have read over the thread...and I am arriving at the same conclusion. Their MIGHT be a chance that it ts Realtek
My System SpecsSystem Spec
Reply

 Network card - Ethernet not plugged in




Thread Tools




Similar help and support threads
Thread Forum
Plugged In Ethernet Cable Not Detected
Today an issue popped up with my network connection, when I plug in an ethernet cable to my laptop, it still shows as no cable detected. I have a Dell Insipron 1750 with a Marvel Yukon 88E8040 ethernet controller. It's not a cable issue, as I plugged it in to another computer and it works just...
Network & Sharing
Network speed and ethernet cable questions with wifi card question
Debating on going wireless or not: Have an Asus M4A87TD EVO that has RTL8111E PCIe Gigabit LAN controller featuring AI NET2. So Gigabit, Im thinking at least 100/1000. I am wire into my router which puts out high speed and low ping to wireless. Standard Ethernet cables supply the data pipeline, not...
Network & Sharing
an ethernet cable is not properly plugged in or might be broken
I own a toshiba satellite C655-S5061 with win7x64 sp1 ultimate installed on it. My internet (wired) connection used to work fine until yesterday. Troubleshooter says "an ethernet cable is not properly plugged in or might be broken", Tried a repair install, updated drivers, reinstalled drivers...
Network & Sharing
Prevent Network Card shutdown on ethernet cable removal
I need to know if this is a Windows 7 issue... I am running software which is licensed through my network card ID. I have recently bought a new laptop, running Windows 7 for the first time. Unless there is a network cable plugged in, I have no access at all to my card and so the software does...
Network & Sharing
Unique Problem Ethernet cable Not plugged in
Ok i recently installed from win xp home 32 bit, to win 7 proffessional 64 bit (i reformatted) and after installing all my drivers i notice that the internet is listed as disconnected, i try the troubleshoot option, and it tells me that my ethernet cable is not plugged in properly/broken. now the...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:18.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App