Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: DHCP is disabled but IP address is dynamic?

03 Aug 2012   #1

Windows 7 Home Premium 32bit
DHCP is disabled but IP address is dynamic?

So I've been looking through the forums for the last few hours trying to figure out what my computer's deal is. My network is set to automatically set an IP, and this has worked semi-okay for the past few days. It disconnects a lot but I can usually go to the Command Prompt and then release and renew my IP, which would normally fix it. So I did that today, only that time it said something about being unable to contact the DHCP server. So I then typed in ipconfig /ALL and it said the DHCP isn't enabled. I tried it again just recently, but instead I get a message saying that the RCP server is unavailable, but the ipconfig /ALL prompt still says the DHCP isn't enabled. So now I'm stuck using my phone to find solutions for this. If anyone has any idea to fix this, please please let me know, I've been looking for a working solution for hours...

My System SpecsSystem Spec
07 Aug 2012   #2

Windows 7 Ultimate x64, BackTrack Linux 5 R2, Windows XP

You could try setting a static IP and see if the connection remains stable at that point. Just make sure you pick an IP that you know is available, and that the subnet mask is correct (usually for home environments), and that the gateway address is the address of your router (usually
My System SpecsSystem Spec

 DHCP is disabled but IP address is dynamic?

Thread Tools

Similar help and support threads
Thread Forum
How do i know why Static IP address dropped and getting into DHCP
Hi All, I need assitance to find out why some of computer in my work place getting into DHCP. Let me give some insight. We have 1 Server 2008 R2 and 30 Windows 7 pro computer. All connected through network and PXE booted. WInpe and wim are stored in server. We have script to set IP address,...
Network & Sharing
Problems with DHCP not at all/quickly assigning an IP address
Like the title says, I am having trouble connecting to the internet. It seems like DHCP is not working, though it is running. I have tried disabling ipv6, setting up a static ip and neither worked. It persists if windows firewall is turned off. After some time it does successfully connect to the...
Network & Sharing
how to change a Dynamic ip address in windows 7?
I have been doing a lot of reading on how to change your IP and to me in windows 7 it is not possible. How to change (Dynamic) IP address in Windows 7 or Vista? Has any one been able to change there IP? I have tried everything. run/ipconfig /release, unpluging modem and router and no change.
Network & Sharing
DHCP assigning address outside of Scope
Hi Everyone, I have a strange networking situation. Let me start by saying this situation is on a Domain, and that I am using Windows 2011 SBS and Windows 7 clients. My server has a DHCP range of 192.x.x.150 to 192.x.x.199 - and all other I.P. addresses are static. On a workstation located...
Network & Sharing
How to set up a dynamic IP address?
Can anyone help me? Thanks.
Network & Sharing
IP address from DHCP
Hi, After joining my laptop to domain ( 2003 env) my laptop is not taking the IP address from DHCP server. However with static IP it is running fine . Laptop details Dell latitude D530 Ram 2 GB Operating system : windows 7 Network card : Broadcom netXtream 57XX Gygabyte
Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:44.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App