Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Wrong IPv4 address

13 Sep 2009   #1
shawnzee

Windows 7
 
 
Wrong IPv4 address

OK, Here is my problem, I just reset my router and for some reason my router keeps assigning my pc the ip of 192.168.0.100 so I cant connec with my pc. The default gateway 192.168.2.1 and the range is 192.168.2.2 - 192.168.2.99, every other pc and devices get proper ip address can anyone help?


My System SpecsSystem Spec
.
13 Sep 2009   #2
zigzag3143

Win 8 Release candidate 8400
 
 

Shawnzee

Im assuming you rebooted the router first then the pc right? could you tell us abt you wifi/nic and network setup? are you trying to assign static IP's to the pc's or do you want to let the router assign IP?

Ken
My System SpecsSystem Spec
13 Sep 2009   #3
shawnzee

Windows 7
 
 

I fixed the problem, I revoked the old 192.168.0.100, but I cannot get the router to assign my pc the static ip address of 192.168.2.1
My System SpecsSystem Spec
.

13 Sep 2009   #4
ddeen

Windows 7 RC 7100
 
 

Forget trying to do this with your router, go into your Local Area Connection Properties iPv4 settings on your win7 computer and choose "use the following IP address" type in 192.168.2.2 you can't use 192.168.2.1 that is your router address, tab through the subnet mask, enter your router address for the Default Gateway and then the router address in the Preferred DNS server.
My System SpecsSystem Spec
Reply

 Wrong IPv4 address




Thread Tools




Similar help and support threads
Thread Forum
No Internet Access on ipv4 address
Hello, I have some problem here.. so i want to connect my laptop to the wireless connection.. it show as connected but keep saying "No Internet Access" the connection worked normally for other devices like on my PC and smartphones.. it seems like only this laptop have a problem.. I change...
Network & Sharing
Whatever happened to the IPv4 address crisis?
Source A Guy
News
How to display IPv4 address at Windows startup ?
I am on a work computer with dynamic IP address (Ipv4), which usually changes when I restart it. Since I sometimes need to use this PC through remote desktop connection at home I like to keep its IP address handy. But I sometimes forget to check the IP at restart, so is there a batch file or...
General Discussion
IPv6 and static IPv4 address
Hi, I like to know whether is Windows 7 has a bug on IPv6 and IPv4. If I left IPv6 setting on on my NIC adaptor, I am unable to keep my own static IPv4 address after I config it and I restart my PC. On the other hand, I switched IPv6 off on my NIC, then I am enable to set up my own static IP...
Network & Sharing
Windows 7 Certified IPv6 Ready as IPv4 Address Space Drops Below 5%
Source: Windows 7 Certified IPv6 Ready as IPv4 Address Space Drops Below 5% - Softpedia
News


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:40.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App