some adapters are not showing , and show network status not working ..

up?

cmd> Netstat -rn and see which is currently working LTE is over my head :)

as I understand everything looks fine realtek PCIe and LTE_ZZ LTE Using 4G tunneling and you see it as something wrong but its your wireless adapter its about driver of your wireless adapter. do you use any external Dongle for 4G? if yes indoor or outdoor?

netstat -m command results
===========================================================================
Interface List
36...00 ff 26 67 31 75 ......TeamViewer VPN Adapter
34...00 ff 87 91 0e d8 ......Comodo Unite Adapter
29...e0 cb 4e a8 20 80 ......Realtek PCIe GBE Family Controller
27...00 26 82 62 3d c1 ......802.11n Wireless LAN Card
44...08 00 27 00 e0 bb ......VirtualBox Host-Only Ethernet Adapter
1...........................Software Loopback Interface 1
23...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
47...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
33...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
24...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3
25...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #7
26...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #8
===========================================================================

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.2.1 192.168.2.175 20
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
169.254.0.0 255.255.0.0 On-link 169.254.228.228 261
169.254.0.0 255.255.0.0 On-link 169.254.12.67 276
169.254.12.67 255.255.255.255 On-link 169.254.12.67 276
169.254.228.228 255.255.255.255 On-link 169.254.228.228 261
169.254.255.255 255.255.255.255 On-link 169.254.228.228 261
169.254.255.255 255.255.255.255 On-link 169.254.12.67 276
192.168.2.0 255.255.255.0 On-link 192.168.2.175 276
192.168.2.175 255.255.255.255 On-link 192.168.2.175 276
192.168.2.255 255.255.255.255 On-link 192.168.2.175 276
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 169.254.12.67 276
224.0.0.0 240.0.0.0 On-link 169.254.228.228 261
224.0.0.0 240.0.0.0 On-link 192.168.2.175 276
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 169.254.12.67 276
255.255.255.255 255.255.255.255 On-link 169.254.228.228 261
255.255.255.255 255.255.255.255 On-link 192.168.2.175 276
===========================================================================
Persistent Routes:
None

IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination Gateway
1 306 ::1/128 On-link
44 276 fe80::/64 On-link
34 261 fe80::/64 On-link
27 276 fe80::/64 On-link
27 276 fe80::4ce3:d593:7a40:f82/128
On-link
44 276 fe80::c09a:78a5:c11d:c43/128
On-link
34 261 fe80::dd38:9321:924f:e4e4/128
On-link
1 306 ff00::/8 On-link
44 276 ff00::/8 On-link
34 261 ff00::/8 On-link
27 276 ff00::/8 On-link
===========================================================================
Persistent Routes:
None
and i'm connected with wireless not lan .. the problems all are appearing clearly in the picture up there , wrong connection icon , a lot of adapters disappeared , status does not show anything when i click on it

My opinion everything is okay take a look at this picture I tried to explain why it is like that also you can try to install this update for your ISATAP adaptor, On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP adapter appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

yeah everything is okay except that adapters disappeared and show status not working and stupid weird icon
i cannot configure my adapter
i must use netsh to configure ..
yes that's true i'm using netsh to configure my adapter settings

Code:

netsh interface ip set address name="Wireless Network Connection" static 192.168.2.111 255.255.255.0 192.168.2.1
netsh interface ip set dns "Wireless Network Connection" static 192.168.2.1

Hi Sora,
i think its 1 of those weirdo things that MS put in to confuse people,
have a look under Phones and modems it should be there.

Roy

ps use same adapter are you using this driver (most upto date)

driver already updated , still problem not solved ..
edit :
i've also uninstalled the adapter then restarted my pc but the problem still same

excuse meh?