New
#1
Configuring a adsl2 router
Hi,
I had switched my isp. The new isp had provided a cisco dpq2160 cable modem which has a ip address of 192.168.100.1. I have a desktop and two laptops so i need to configure my Binatone dt845w adsl2 router.
When i connect my desktop to the modem the ip assigned is 27.7.58.XX, gateway - 27.7.56.1 subnet - 255.255.248.0.
I assigned the same to the adsl wireless router. The modem is connected to the ethernet port of the router and then connected to the desktop. So the router settings are the same as the previously mentioned settings.
The router assigns the same ip the desktop and i'm able to connect to the internet only on the desktop. My mobile is assigned the ip of 27.7.58.156 but mot able to access the internet. If i change the router ip or the local pool range nothing works.
How come the modem IP is in different range compared to the desktop IP it assigned. When accessing the modem with its Ip it doesnt show any settings other than this. (Ofcourse with values which i didnt include.)
Name
Modem Serial Number
Cable Modem MAC Address
Hardware Version
Software Version
Receive Power Level
Transmit Power Level
I know that the current settings are wrong. Please guide me to configure this. Thanks in advance