Wireless performance home network

Page 1 of 2 12 LastLast

  1. Posts : 37
    Windows 7 64 bit
       #1

    Wireless performance home network


    I have Comcast Cable and a Linskys router WRT54G (V4) upstairs in my home office: In summertime I move downstairs, where it is more comfortable. I have to move my desktop computer , monitor and printer downstairs. My router and cable modem has to remain upstairs, since the Comcast Cable is directed there. I do not have a Comcast cable near where my desk is downstairs. So downstairs I use the wireless option to get the signal from the router. I am looking to optimize on the signal to noise ratio from my router and also to have a way of assessing the performance by virtue of measuring the signal received. There is a series of vertical bars that you can see in Windows denoting the signal strength and this measure has looked excellent downstairs. Nevertheless after a couple of days I lost my signal downstairs so I had to move all the equipment upstairs again and reconnect to the Internet with an Ethernet cable again. So I am back upstairs now. With the Ethernet Cable disconnected in the wireless mode upstairs it looks OK, but the vertical bars were not any different from when I was downstairs.

    I am looking to optimize the wireless signal and quality downstairs so suggestions are welcome,

    Angus
      My Computer


  2. Posts : 85
    Windows 7 Home Premium 64bit
       #2

    angusmdmclean said:
    I have Comcast Cable and a Linskys router WRT54G (V4) upstairs in my home office: In summertime I move downstairs, where it is more comfortable. I have to move my desktop computer , monitor and printer downstairs. My router and cable modem has to remain upstairs, since the Comcast Cable is directed there. I do not have a Comcast cable near where my desk is downstairs. So downstairs I use the wireless option to get the signal from the router. I am looking to optimize on the signal to noise ratio from my router and also to have a way of assessing the performance by virtue of measuring the signal received. There is a series of vertical bars that you can see in Windows denoting the signal strength and this measure has looked excellent downstairs. Nevertheless after a couple of days I lost my signal downstairs so I had to move all the equipment upstairs again and reconnect to the Internet with an Ethernet cable again. So I am back upstairs now. With the Ethernet Cable disconnected in the wireless mode upstairs it looks OK, but the vertical bars were not any different from when I was downstairs.

    I am looking to optimize the wireless signal and quality downstairs so suggestions are welcome,

    Angus
    I'm a strong supporter of Alfa wireless, and have used them for years, even used one of their cards in a custom made WiFi satellite dish to pick up WiFi from, if I remember correctly, up to almost 3/4 a mile away with their USB b/g card, was a long time ago I did that. To say the least it never failed over the year or two I used it and that's an indoor card sitting out in the sun, rain, wind, etc powered on 24/7. May sound like I'm recommending some over priced overpowered thing but they don't cost too much ($26 on their Amazon store). ALFA NETWORK Inc.
      My Computer


  3. Posts : 37
    Windows 7 64 bit
    Thread Starter
       #3

    Thanks for the advice: I will contact Alfa. This is a puzzle since the vertical bars indicated that my Network signal strength was "exellent" downstairs. Last year I was able to do this and I did not have a problem.

    Angus
      My Computer


  4. Posts : 85
    Windows 7 Home Premium 64bit
       #4

    angusmdmclean said:
    Thanks for the advice: I will contact Alfa. This is a puzzle since the vertical bars indicated that my Network signal strength was "exellent" downstairs. Last year I was able to do this and I did not have a problem.

    Angus
    Generally three bars is unstable, two bars is very unstable to unusable, and one bar is the same as being disconnected, it depends on the WiFi card and what you're doing but with all the computers I've used it averages out to a chart like that. So how many bars did you have downstairs and upstairs? Also have you thought of just buying 50ft+/- of coaxial cable and running it against the wall to downstairs during the summer so you can bring the modem with you? Or setting up power line ethernet?
    75feet coaxial cable ($17.99): STEREN 208-440BK - Newegg.com
    Powerline Ethernet kit ($29.99): Tenda P200 Powerline Mini Adapter Kit - Newegg.com
      My Computer


  5. Posts : 598
    Windows 7 Ultimate x64
       #5

    You can try a free DYI parabolic wifi booster. This page has a .pdf file instructions on how to make it. All you need is tin foil and paper. DIY WIFI Antenna Reception Booster
      My Computer


  6. Posts : 37
    Windows 7 64 bit
    Thread Starter
       #6

    There was no difference : upstairs it was 5 bars and downstairs it was also 5 bars.{ I am gong to check this work again!}. I have considered a Netgear product that uses the wiring in the house: you connect a Netgear module to the router upstairs and the wall socket and a second module to the computer and wall socket downstairs using ethernet cables (cost $100). I do have a Comcast signal downstairs in the family room and I guess I could run a cable from the to the living room (underneath the floor in the basement and bring it up in the family room}. Now that woud involve drilling holes in floor at calculated precise locations and would be a bit of work.
    I really need to check out that it fails again or how much it fluctuates across the day downstairs, but this is a painful process. I am a consultant and I am very busy this week. Also I could try the aluminium foil approach
      My Computer


  7. Posts : 85
    Windows 7 Home Premium 64bit
       #7

    angusmdmclean said:
    There was no difference : upstairs it was 5 bars and downstairs it was also 5 bars.{ I am gong to check this work again!}. I have considered a Netgear product that uses the wiring in the house: you connect a Netgear module to the router upstairs and the wall socket and a second module to the computer and wall socket downstairs using ethernet cables (cost $100). I do have a Comcast signal downstairs in the family room and I guess I could run a cable from the to the living room (underneath the floor in the basement and bring it up in the family room}. Now that woud involve drilling holes in floor at calculated precise locations and would be a bit of work.
    I really need to check out that it fails again or how much it fluctuates across the day downstairs, but this is a painful process. I am a consultant and I am very busy this week. Also I could try the aluminium foil approach
    If you are getting five bars then you are having an issue somewhere besides the signal getting to and from your computer. Does it happen to all computers in the house or just this one?
      My Computer


  8. Posts : 37
    Windows 7 64 bit
    Thread Starter
       #8

    I only have two computers on the network: the one I am referring to is the desktop computer. The network was set up on this computer. I first noticed that the wireless signal was lost on my lapatop computer, which is ustairs. When it stopped getting the signal I went downstairs and notced theat the signal l was lost on the desktop. So I moved teh desktop back upstairs. I need to check this again.
      My Computer


  9. Posts : 457
    Microsoft Windows 10 Home Build 15036
       #9

    After this last post, I'd say it's time to replace your router.

    Newegg.com - 2.4GHz & 5GHz Concurrent Dual Band Wireless-N Router 300Mbps with 4-port LAN Switch (Integrated) could be just the thing you're looking for. It's fairly inexpensive and it looks like it should handle everything you've described as needed. The only issue might be the brand name.

    Of course, that's if someone doesn't come up with a GREAT solution, here.
      My Computer


  10. Posts : 2,298
    Windows 7 Professional x64 SP1 ; Windows Server 2012 R2 Standard
       #10

    +1 ^^

    If I was looking for a home router then the above has all features and more (VLANS, etc) with it :)

    My only issue is bandwidth though I tend to use a bit more than the average user so in all honesty I think it would work great

    Josh :)
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 06:45.
Find Us