Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Connecting to single router ??

23 Sep 2013   #1

windows 7
Connecting to single router ??

I have an HP-all-in-one , win7 x64
and I am trying to connect it to my AppleRouter via EtherNet cable .
I already have a Toshiba laptop with wireless connection to this router .
The HP has an Enabled Network Adapter ,
But I can't get windows to recognize the router .

I notice there is a turorial for "multiple routers" .
But no tutorial for setting up a 'single router' , servicing multiple computers .


My System SpecsSystem Spec
23 Sep 2013   #2

Win7 & Win8 64bit

Welcome to Seven Forums,

You may try a hard reset of your printer if the printer is not being recognized in the network. You should be able to print the network config. of the printer that will tell you what the subnet (eg....192.168.0.X) and ipconfig/all output of the printer which needs to be matched with what your router is handing out in your network.

If you need us to provide a detail assistance please let us know the Model of your HP all-in-one printer.
My System SpecsSystem Spec

 Connecting to single router ??

Thread Tools

Similar help and support threads
Thread Forum
Connecting two separate desktop PC's to a single dual monitor setup.
Hi, I have always had custom built machines, and in the past I have always had the same desktop PC dual booting into two different versions Windows OS, for two different uses. However after a recent HDD crash, on one of the system drives, which has been sent for recovery, I have decided to...
PC Custom Builds and Overclocking
Connecting Wireless router to Cable Modem/Router
My wife's sister has Comcast Cable. They installed a Modem/Router that the wireless part seems to have died. Can a wireless router be connected via ethernet cable to the cable modem/ router?
Network & Sharing
Connecting to Wireless Router keeps connecting and disconnecting
Hello Guys, I am having trouble with my wireless connection. It was working fine till a couple of days back and then started acting up. Let me explain the problem in detail. System connects to the router. It shows full signal. After 10-15 seconds the wireless gets disconnected. After that the...
Network & Sharing
Router Not connecting
After I had to use ATT tech support to get my dsl working again.. which they did , by doing a re-set of my dsl modem. Now my router won't connect. I see security icon, light bright green, I see wired icon bright green, I see router icon, bright green, I see a flashing icon for my modem...
Network & Sharing
Not connecting to router
Hi, I have HP DV6 1335 laptop. It comes with windows 7 home premium and realtek nic PCIe FE(It might be 8169). I am trying to connect it to netgear router using wire lan, its not able to connect. When i run diagnostics, it says to restart the router. I restart it and click the check again it...
Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:39.
Twitter Facebook Google+