Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: No Internet on desk top but all wifi devices work perfect.

05 Oct 2013   #11
Keggers

Windows 7
 
 

Thanks, I'll try that in the morning and report my findings.


My System SpecsSystem Spec
.
08 Oct 2013   #12
Keggers

Windows 7
 
 

Quote   Quote: Originally Posted by chev65 View Post
When I see things disappearing like this then there could be some system file corruption or more unlikely is hardware failure.

To check the system files open an elevated command prompt and type or copy/paste> sfc /scannow then hit enter, let the scan run and see what it says when it's finished.


Hi there, I have done as requested above and I attach a photo of the results, not sure what it means though...


Attached Thumbnails
No Internet on desk top but all wifi devices work perfect.-6c1980faeb3c92efc46b35468813e03e.jpg  
My System SpecsSystem Spec
08 Oct 2013   #13
Keggers

Windows 7
 
 

Quote   Quote: Originally Posted by Keggers View Post
Quote   Quote: Originally Posted by chev65 View Post
When I see things disappearing like this then there could be some system file corruption or more unlikely is hardware failure.

To check the system files open an elevated command prompt and type or copy/paste> sfc /scannow then hit enter, let the scan run and see what it says when it's finished.


Hi there, I have done as requested above and I attach a photo of the results, not sure what it means though...
I entered the wrong command and have re done the scan and posted the results.


Attached Thumbnails
No Internet on desk top but all wifi devices work perfect.-523c36ca0395f952be17a69af64ccede.jpg  
My System SpecsSystem Spec
.

08 Oct 2013   #14
chev65

Windows 7 Ult, Windows 8.1 Pro,
 
 

Quote   Quote: Originally Posted by Keggers View Post
Quote   Quote: Originally Posted by Keggers View Post
Quote   Quote: Originally Posted by chev65 View Post
When I see things disappearing like this then there could be some system file corruption or more unlikely is hardware failure.

To check the system files open an elevated command prompt and type or copy/paste> sfc /scannow then hit enter, let the scan run and see what it says when it's finished.


Hi there, I have done as requested above and I attach a photo of the results, not sure what it means though...
I entered the wrong command and have re done the scan and posted the results.
Well it's not a system file problem which would have been an easy fix.

Try running the file below, it will reboot your machine after it resets the network stack, please post the ipconfig/all again after the reboot.


Attached Files
File Type: zip IPResetALL.zip (33.6 KB, 10 views)
My System SpecsSystem Spec
09 Oct 2013   #15
Keggers

Windows 7
 
 

Quote   Quote: Originally Posted by chev65 View Post
Quote   Quote: Originally Posted by Keggers View Post
Quote   Quote: Originally Posted by Keggers View Post



Hi there, I have done as requested above and I attach a photo of the results, not sure what it means though...
I entered the wrong command and have re done the scan and posted the results.
Well it's not a system file problem which would have been an easy fix.

Try running the file below, it will reboot your machine after it resets the network stack, please post the ipconfig/all again after the reboot.

Hi chev65

I ran the file below and post my latest ipconfig/all results although I think there's no difference from the first try,


Attached Thumbnails
No Internet on desk top but all wifi devices work perfect.-cdfc3e8495dad36b3eba7ee9bde1737c.jpg  
My System SpecsSystem Spec
09 Oct 2013   #16
chev65

Windows 7 Ult, Windows 8.1 Pro,
 
 

Quote   Quote: Originally Posted by Keggers View Post
Quote   Quote: Originally Posted by chev65 View Post
Quote   Quote: Originally Posted by Keggers View Post

I entered the wrong command and have re done the scan and posted the results.
Well it's not a system file problem which would have been an easy fix.

Try running the file below, it will reboot your machine after it resets the network stack, please post the ipconfig/all again after the reboot.

Hi chev65

I ran the file below and post my latest ipconfig/all results although I think there's no difference from the first try,
Ok then we know it's something on the board or it's hardware related at this point.

Are you able to access the cmos on this machine in order to clear the cmos and reset the board?
My System SpecsSystem Spec
09 Oct 2013   #17
Keggers

Windows 7
 
 

Quote   Quote: Originally Posted by chev65 View Post
Quote   Quote: Originally Posted by Keggers View Post
Quote   Quote: Originally Posted by chev65 View Post

Well it's not a system file problem which would have been an easy fix.

Try running the file below, it will reboot your machine after it resets the network stack, please post the ipconfig/all again after the reboot.

Hi chev65

I ran the file below and post my latest ipconfig/all results although I think there's no difference from the first try,
Ok then we know it's something on the board or it's hardware related at this point.




Are you able to access the cmos on this machine in order to clear the cmos and reset the board?


That was quick chev65, I'm sorry but you will have to explain a little further. The cmos?
My System SpecsSystem Spec
09 Oct 2013   #18
Keggers

Windows 7
 
 

Quote   Quote: Originally Posted by chev65 View Post
Quote   Quote: Originally Posted by Keggers View Post
Quote   Quote: Originally Posted by chev65 View Post

Well it's not a system file problem which would have been an easy fix.

Try running the file below, it will reboot your machine after it resets the network stack, please post the ipconfig/all again after the reboot.

Hi chev65

I ran the file below and post my latest ipconfig/all results although I think there's no difference from the first try,
Ok then we know it's something on the board or it's hardware related at this point.

Are you able to access the cmos on this machine in order to clear the cmos and reset the board?
Hi chev65, CMOS cleared I believe, this is a screen shot when powered up.. What next?, thankyou.


Attached Thumbnails
No Internet on desk top but all wifi devices work perfect.-76931591f5202cd3888543f54f169562.jpg  
My System SpecsSystem Spec
09 Oct 2013   #19
chev65

Windows 7 Ult, Windows 8.1 Pro,
 
 

You might want to check the Date/Time settings, it says they aren't set for some reason.

Pressing the Delete button should get you to where you can set the date/time, might have to look around a bit in bios, then load defaults and start up then post the ipconfig/all to see if anything has changed.

Do you have Zone Alarm installed on this system?

Let me look around for more solutions,:

If the yellow exclamation is still showing for Teredo tunneling then try the following.

1. Open command prompt with administrator credentials (Find CMD and right-click - Run as Administrator).
2. Enter netsh environment. Type "netsh" and ENTER.
3. "int teredo" and ENTER
4. "set state disabled" and ENTER.
5. Open Device Manager and uninstall "Teredo Tunneling Pseudo-Interface".
6. Open command prompt with administrator credentials once again.
7. netsh + ENTER.
8. "int ipv6" + ENTER
9. "set teredo client" + ENTER
10. Open Device Manager and Scan for new hardware.
11. Select "Show hidden devices" from the View menu. You will now see that it is present without errors with any luck.

Option#2
If the item is disabled.
In the start menu search bar type in REGEDIT to open the registry editor. Navigate through the following:

HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES\TCPIP6\PARAMETERS.

In the right pane look for Disabled Components, right click Disabled Components and select edit. Set the DWord value to 0. (If you do have Disabled Components there, the value may for example be set to ff which is invalid.)

You must Restart your computer and the teredo tunneling adapter will now start.
My System SpecsSystem Spec
10 Oct 2013   #20
Keggers

Windows 7
 
 

Quote   Quote: Originally Posted by chev65 View Post
You might want to check the Date/Time settings, it says they aren't set for some reason.

Pressing the Delete button should get you to where you can set the date/time, might have to look around a bit in bios, then load defaults and start up then post the ipconfig/all to see if anything has changed.

Do you have Zone Alarm installed on this system?

Let me look around for more solutions,:

If the yellow exclamation is still showing for Teredo tunneling then try the following.

1. Open command prompt with administrator credentials (Find CMD and right-click - Run as Administrator).
2. Enter netsh environment. Type "netsh" and ENTER.
3. "int teredo" and ENTER
4. "set state disabled" and ENTER.
5. Open Device Manager and uninstall "Teredo Tunneling Pseudo-Interface".
6. Open command prompt with administrator credentials once again.
7. netsh + ENTER.
8. "int ipv6" + ENTER
9. "set teredo client" + ENTER
10. Open Device Manager and Scan for new hardware.
11. Select "Show hidden devices" from the View menu. You will now see that it is present without errors with any luck.

Option#2
If the item is disabled.
In the start menu search bar type in REGEDIT to open the registry editor. Navigate through the following:

HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES\TCPIP6\PARAMETERS.

In the right pane look for Disabled Components, right click Disabled Components and select edit. Set the DWord value to 0. (If you do have Disabled Components there, the value may for example be set to ff which is invalid.)

You must Restart your computer and the teredo tunneling adapter will now start.

Hi, I'm at the uninstall teredo part but can't find it in devices?
My System SpecsSystem Spec
Reply

 No Internet on desk top but all wifi devices work perfect.




Thread Tools




Similar help and support threads
Thread Forum
No internet on work WiFi - LAN OK - Hotspot OK - Firewall issue??
Hey all. First time poster, and a little stumped here, and looking for some troubleshooting advice. I'll try to keep this as brief as possible, while still sharing plenty of details. I work as an IT Specialist for a small organization, primarily as help desk support, but since we're small I...
Network & Sharing
Laptop access internet via wifi but not other devices
This morning i tried to use other devices (another laptop, a cell phone and an ipad) that were working fine before, but now they don't have internet access. The devices can connect to the router, but internet shows "No internet". I was checking if their were getting the info like ip, dns..etc and...
Network & Sharing
Internet Wifi Doesn't Work/Disconnects
I'm in an apartment that has cable internet and i use the wifi. The first 2 months, i rarely had any issues besides a few random disconnects where i connect back and its working perfectly. Few days ago, the electricity went out for close to 2 days. Then once electricity came back, internet...
Network & Sharing
Devices Connect to Wifi, but no Internet Connection
DISCLAIMER: This is my first post so I apologize for any mistakes I make. Hello all, Yesterday morning upon waking up I discovered that the Wifi in my house was no longer working. It had worked fine the day before but stopped working completely overnight. At first I thought it might have...
Network & Sharing
internet does not work on laptop but works on other devices
I am having an issue that has been an on and off problem for the past month. I currently am using a browser called torch which is a chrome style browser. But my main browser is firefox. Whenever firefox is open I cannot browse the web and when I try web pages do not load on any browser that I try...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:15.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App