Local Area Connection not showing in Network Connections


  1. zpmipa
    Posts : 5
    Window 7 Ultimate x32
       New #1

    Local Area Connection not showing in Network Connections


    Sorry for poor English....!!!

    I have 2 LAN cards installed in my Core2Duo;
    1. Intel(R) PRO/100 VE, and
    2. RealTek

    but only one shows up in "Network Connection" that is "Intel PRO/100 VE" (which is named as "Local Area Connection 2"), which is working fine.

    Green LED light shows up when I plugged the Ethernet cable into RealTek NIC, but still the Local Area Connection isn't there only one is present that is Local Area Connection 2... initially it used to show both...

    The "Network Adapters" in Device Manager, doesn't show any RealTek Drive or any Exclamation ICON, but do shows "Intel PRO/100" without Exclamation, so it is working fine...

    how to enable both LAN cards in Network Connection... Pls. guide for the same...

    Thank you

    Regards

    Hari Om
      My Computer
    Quote Quote

  3. Brink
    Posts : 72,442
    64-bit Windows 11 Pro for Workstations
       New #2

    Hello Hari Om, and welcome to Seven Forums.

    Do you have the drivers installed for the RealTek LAN card?
      My Computer
    Quote Quote

  4. zpmipa
    Posts : 5
    Window 7 Ultimate x32
    Thread Starter
       New #3

    Hello Brink,

    thks for kind reply..

    how to install a driver then it is not showing in Device Manager... and how to know, which driver will it need... I just know it is RealTek... pls. help me out..

    Regards,
      My Computer
    Quote Quote

  6. Brink
    Posts : 72,442
    64-bit Windows 11 Pro for Workstations
       New #4

    Do you know the model number of the RealTek LAN card?

    I'll see if I can help find the latest driver for it. :)
      My Computer
    Quote Quote

  7. chev65
    Posts : 8,870
    Windows 7 Ult, Windows 8.1 Pro,
       New #5

    Often times when a NIC just vanishes from Device Manager it can be found again by shutting down the system completely, turn off power on power supply, unplug the power then push the start button to bleed off left over power from the board. If it's a PCI/e type NIC then remove it from the board and reinstall.

    Plugging the system back in and starting up will usually allow Windows to find the missing NIC again.
      My Computer
    Quote Quote

  8. zpmipa
    Posts : 5
    Window 7 Ultimate x32
    Thread Starter
       New #6

    Thank you Chev65 and Brink for your gr8 help... :)

    Sir, Shunt down and unplugged did not work for me... but when I removed the LAN and inserted again, Windows automatically detected it and installed... and now it's working fine... !!

    Once again, many many thxz for ur support :)

    Regards
      My Computer
    Quote Quote

  10. Brink
    Posts : 72,442
    64-bit Windows 11 Pro for Workstations
       New #7

    Great news. :)
      My Computer
    Quote Quote

  11. chev65
    Posts : 8,870
    Windows 7 Ult, Windows 8.1 Pro,
       New #8

    zpmipa said:
    Thank you Chev65 and Brink for your gr8 help... :)

    Sir, Shunt down and unplugged did not work for me... but when I removed the LAN and inserted again, Windows automatically detected it and installed... and now it's working fine... !!

    Once again, many many thxz for ur support :)

    Regards
    Glad to hear it, usually works for me as well. :)
      My Computer
    Quote Quote

 

  Related Discussions
Windows 7 64bit Professional: Recently cloned another machine and imaged this one and it was working fine. Did a few windows updates and was working fine. Now on reboot "No Connections Available". This is in a school comp. lab and this happened to 1 other machine (wasn't able to fix). I've...
I had lot of problems with my laptop earlier when my wired connection didn't work at all... wifi did. However yesterday i got the wired connection to work. I use an ethernet cable very long one to connect to router. Today i cannot connect wired. Not only that, i went to local area network and...
Hi Team, I have a problem with my Local Area Connection. I have installed the driver correctly and can access the internet also. But when I go to Open Network and sharing center -> change adapter setting -> I can not see Local Area Connection icon appear. My OS is windows 7, HP System.
Recently had to reset wireless router and discovered my LAC wasn't working on my desktop. Wizard says bad cable, but I bought a new one and was able to establish a LAC connection on my laptop, which was how I was able to login into my wireless router. I hadn't noticed system tray icon went from...
Hi Guys, I have a question if there is a way to hide the "local Area Connection" icon in the Change Adapter Settings window. We do not want the regular users changing settings that they do not understand. Of course this is for Windows 7. A way to do it via Group Policy would be...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 04:41.
Find Us