Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Problem After ADSL2+ Modem Replaced

23 Mar 2014   #11

Windows 7 Ult, Windows 8.1 Pro,

Quote   Quote: Originally Posted by PCrazy123 View Post
Thanks for helping.

Quote   Quote: Originally Posted by chev65 View Post
The ipconfig/all command needs to be typed into an elevated command prompt in order to show results.

I've never actually seen this ICMP echo request in my life but the following link shows adjustments that may help.

How to unblock ICMP echo requests from windows firewall?? - Windows 7 Antivirus and Security - Help and Discussion
I blocked the IGMP Inbound\Outbound from my antivirus firewall and disabled Multicast form my modem and now this issue is almost solved as everytime I enable internet upto 10 IGMP requests are sent, the firewall blocks these initial requests and then no further requests are sent for the duration of the connection.
The anti virus firewall may be causing the remainder of this problem because with Windows I've never seen this type of problem.

My System SpecsSystem Spec

 Problem After ADSL2+ Modem Replaced

Thread Tools

Similar help and support threads
Thread Forum
BSOD 0x116 (stop error) Replaced GPU, replaced RAM, replaced PSU
My monitor goes black and I am forced to reboot. After rebooting I get a blue screen prompt telling me that i've recovered from a BSOD. I've been monitoring them since October. In October, I RMA'd my graphics card. Oct 27. You can see that after I got a new GPU, my BSOD's halted... so...
BSOD Help and Support
How do you know if you are on ADSL2 or ADSL2+ ?
How do you know if you are on ADSL2 or ADSL2+ ? I called Sky today and they said they have put me on it but the speeds tell me different, I was getting 9Mbps downstream and 1111 upstream. Now I am getting Downstream Connection 9465 and I have lost out in the upstream 798. which is giving me...
Hardware & Devices
Replaced SSD - Boot/HDD problem
First off thank you for any help. Previous system had Windows 7 Enterprise N x64 installed on an OCZ Agility 2 SSD 40gig. I also have a 2.2TB HDD that I use as storage. The PC started not recognizing the HDD at boot up, and the SSD was also appearing much more full than it actually was. I...
Installation & Setup
Probably a dumb question :obut: If I switch to a ISP that offers ADSL2+ will my devices (Roku's,Older Tivo's, Gaming Consoles, and older pc's) that currently connect via regular DSL be compatiable with ADSL2+ as long as I have a modem and router that support ADSL2+?
Network & Sharing
Wireless N Router + ADSL2 Modem/Router
Hi guys I'm new here so please be nice ;) OK! so before i changed to TPG ADSL2+ i used to be on optus cable using a Netgear Wireless N router. then when i got TPG, i need a router but found out i had to get a combo modem/router. so i got an Open Networks 824RLW which has wireless G. This...
Network & Sharing

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:24.
Twitter Facebook Google+