No network when i go into safemode with networking.

Yes i am able access Network and Sharing Center,Also if i go into change adapter settings it only
shows a vpn that i sometimes use and no lan settings.
There is no problem with internet when in normal mode.

can i ask why you want to access safe mode with network, when you say it works in normal boot.
Just out of my curiosity.

Hi Josh,Yes it's just one of those things never had a reason to use safe mode with networking until recently,When i had a problem with the new MBAM Premium and a tech guy on the forum wanted me to go into safe mode with networking to see if the problem still persists.
But of course i could'nt go into safe mode with networking to try out this elimination.So i decided for once and for all to see if there is a way to fix this problem.
Hence my plight on this forum.

tommytinkroom said:

Hi Josh,Yes it's just one of those things never had a reason to use safe mode with networking until recently,When i had a problem with the new MBAM Premium and a tech guy on the forum wanted me to go into safe mode with networking to see if the problem still persists.
But of course i could'nt go into safe mode with networking to try out this elimination.So i decided for once and for all to see if there is a way to fix this problem.
Hence my plight on this forum.

Have you had any malware issues before? Do you use any registry cleaners?

Are you able to uninstall any anti-virus or firewall applications and then test connectivity. I am trying to think what could cause this since it isn't a normal behaviour... Hmmm

Not sure if it has been mentioned but can you also try a system file checker scan to see if there is any potential OS corruption that needs to be repaired. Please reboot the machine after each scan and run again for at least 3 or 4 times since some changes cannot be made under one scan.

SFC /SCANNOW Command - System File Checker

Josh :)

[QUOTE=Shadowjk;2759451]

tommytinkroom said:

Hi Josh,Yes it's just one of those things never had a reason to use safe mode with networking until recently,When i had a problem with the new MBAM Premium and a tech guy on the forum wanted me to go into safe mode with networking to see if the problem still persists.
But of course i could'nt go into safe mode with networking to try out this elimination.So i decided for once and for all to see if there is a way to fix this problem.
Hence my plight on this forum.

Have you had any malware issues before? Do you use any registry cleaners?

Are you able to uninstall any anti-virus or firewall applications and then test connectivity. I am trying to think what could cause this since it isn't a normal behaviour... Hmmm

Not sure if it has been mentioned but can you also try a system file checker scan to see if there is any potential OS corruption that needs to be repaired. Please reboot the machine after each scan and run again for at least 3 or 4 times since some changes cannot be made under one scan.

SFC /SCANNOW Command - System File Checker

Josh :)[/QUOTE


No problem with malware the MBAM problem was with the workings of the prog.Yes i occasionally use ccleaner.

Just ran the scannow a few times and it keeps coming up with integrity violations,here's the
CBS log.

tommytinkroom said:

Just ran the scannow a few times and it keeps coming up with integrity violations,here's the
CBS log.

Thank you for the log, I am going to see if someone who can better understand the log can pitch in!

Josh :)

Cheers Josh,and thanks for your interest in my problem.:)

Please download Farbar MiniToolBox from bleepingcomputer.com

On the download action bar

Select Run
Allow MiniToolBox to run if any security dialog boxes request permission

MiniToolBox presents an options dialog window, select the following:

Report IE Proxy Settings
Report FF Proxy Settings
List content of Hosts
List IP configuration
List Winsock Entries
List last 10 Event Viewer log
List Installed Programs
List Devices ... All
List Users, Partitions and Memory size

Press the Go button
The MiniToolBox log file, Results.txt, is opened in your text editor.
Save the log file to your Downloads folder and attach it to a post on your thread.

The default location of the log file is the same as the location of the program. Since you specified Run on the Download action bar, this location is in your browser cache.

The SFCDetails log appears to be incomplete for some reason - however, sufficient details from early runs of SFC are present to be able to see a single error.

Code:

2014-04-26 21:49:08, Info                  CSI    00000316 [SR] Repairing 1 components
2014-04-26 21:49:08, Info                  CSI    00000317 [SR] Beginning Verify and Repair transaction
2014-04-26 21:49:08, Info                  CSI    00000318 [SR] Cannot repair member file [l:20{10}]"_isdel.exe" of Microsoft-Windows-InstallShield-WOW64-Main, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 (10), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
2014-04-26 21:49:08, Info                  CSI    00000319 [SR] Cannot repair member file [l:20{10}]"_isdel.exe" of Microsoft-Windows-InstallShield-WOW64-Main, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_IA32_ON_WIN64 (10), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, file is missing
2014-04-26 21:49:08, Info                  CSI    0000031a [SR] This component was referenced by [l:202{101}]"Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.WindowsFoundationDelivery"
2014-04-26 21:49:08, Info                  CSI    0000031c [SR] Repair complete

I'll post a fix for this later.