Certain Websites Timeout At Local IP On One Computer, All Browsers

Kaktussoft said:

In elevated command prompt

Code:

 
ipconfig/all>ipconf.txt

Post ipconf.txt afterwards.

Other home computers connected to same router have the same problem?

No it's just this one computer.

ipconfig.txt is attached

Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Dell Wireless 1703 802.11b/g/n (2.4GHz)
Physical Address. . . . . . . . . : 16-54-98-33-00-00
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.1.30(Preferred)
Subnet Mask . . . . . . . . . . . : 255.0.0.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 75.75.75.75
75.75.76.76
NetBIOS over Tcpip. . . . . . . . : Enabled


All 192.*.*.* ip addresses you try on the internet gave problems?

Why are you using a static ip address? Is that on purpose? Normally you only do it on servers... ftp server, mail servers or webservers for example.

But why has the wireless adapter a static tcp/ip address?

Did you enter 75.75.75.75 and 75.75.76.76 as DNS manually?

Kaktussoft said:

Please post more ip addresses that fail. Maybe I can see some common property. I think they all begin with 192 (?)

YOU JUST HELPED ME FIGURE IT OUT

I don't know why, but for some reason my computer must have been assuming that anything starting with 192 was an internal IP, so I had my router assign based on 10.0.0.* instead, and that fixed the entire problem. You win the Internet friend. Thank you very much.

To set your network card for DHCP, follow these steps:
1. Click the Start button
2. Click Control Panel
3. Click Network and Internet
4. Click View network status and tasks under Network and Sharing Center
5. Click Change adapter settings on the left navigation bar
6. Right-click on the network adapter who wish to change, such as "Wireless LAN adapter Wireless Network Connection"
7. Select Properties
8. Highlight Internet Protocol Version 4 (TCP/IPv4)
9. Click Properties
10. In the General tab, ensure that Obtain an IP address automatically radio button is selected

11. Click OK twice and exit back to the Desktop

That solves the problem!

Kaktussoft said:

To set your network card for DHCP, follow these steps:
1. Click the Start button
2. Click Control Panel
3. Click Network and Internet
4. Click View network status and tasks under Network and Sharing Center
5. Click Change adapter settings on the left navigation bar
6. Right-click on the network adapter who wish to change, such as "Wireless LAN adapter Wireless Network Connection"
7. Select Properties
8. Highlight Internet Protocol Version 4 (TCP/IPv4)
9. Click Properties
10. In the General tab, ensure that Obtain an IP address automatically radio button is selected

11. Click OK twice and exit back to the Desktop

That solves the problem!

I already fixed it (see my above post), thank you very much