New
#31
Thanks Maxie,
Going to try that now.
:)
Thanks Maxie,
Going to try that now.
:)
Unfortunately it made no difference at all
The Nano behaves exactly as it did previously, scans but cannot find any networks.
Go to the Network Controller select Property's / Advanced Tab ... What is the Value set at ? ...
If you mean in device manager/network/wireless lan it is as follows:
802.11d - Disable
Beacon interval - 100
Wireless mode - IEEE 802.11b/g/n
How? Those are the only 3 options.
In Network connections it says 'not connected' and under options I have 'disable'.
Ipconfig /all
C:\Windows\system32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Netbook
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8192E Wireless LAN 8
-E NIC
Physical Address. . . . . . . . . : 00-24-D2-FA-FE-1B
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8102E/RTL8103E Famil
st Ethernet NIC (NDIS 6.20)
Physical Address. . . . . . . . . : 00-13-77-BC-D8-DA
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 164:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interfa
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{C3F5217A-7571-42EA-9F1E-50ED77DDEAD8}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Go to the Device Manager / Network Controller select it right click select Property's / Advanced Tab .. Where it says Value there should be a drop down box set it to Enabled ..