Need help with Default Gateway issues

Page 1 of 2 12 LastLast

  1. Posts : 6
    Windows 7 Home Premium 64bit
       #1

    Need help with Default Gateway issues


    On an almost daily basis I will lose my internet connection on my desktop computer and when I go through the trouble shooting process it finally pops up and says something about the Default Gateway being lost or disconnected and then it fixes it and I'm fine for the rest of the day. It appears to happen more often when I'm streaming some video I've found on Facebook, or it's really bad when I'm streaming the weather report from a local news station, but sometimes I'm not streaming anything (that I know of) and just opening a new webpage. This has been going on almost since I got the computer over two years ago and I called HP support and they were not help at all. I do turn my computer off every night. Sometimes I'll go two or three days without an issue, but not very often. It is not my modem or router. I have a laptop and my wife's desktop and other devices such as cell phones and smart TV that are still getting signal when my desktop cannot get a connection so it is clearly just this one desktop which happens to be the one I use all the time. It's not a huge deal but it wastes a little time each day so I'm wondering if anyone knows how to fix it permanently.

    Thanks for any assistance.
      My Computer


  2. Posts : 265
    Windows 7 Pro
       #2

    Open Command Prompt and run ipconfig /all and post the results. Is this a wireless or wired connection?
      My Computer


  3. Posts : 6
    Windows 7 Home Premium 64bit
    Thread Starter
       #3

    Thank you for helping.

    I am on a wired connection and here is the IP Config data:

    Windows IP Configuration

    Host Name . . . . . . . . . . . . : Scott-HP
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No

    Ethernet adapter Local Area Connection:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
    Physical Address. . . . . . . . . : E8-40-F2-0E-C5-81
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80::245d:5202:d92c:7ab2%13(Preferred)
    IPv4 Address. . . . . . . . . . . : 192.168.1.143(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Lease Obtained. . . . . . . . . . : Thursday, February 12, 2015 7:27:47 AM
    Lease Expires . . . . . . . . . . : Friday, February 13, 2015 12:29:25 PM
    Default Gateway . . . . . . . . . : 192.168.1.1
    DHCP Server . . . . . . . . . . . : 192.168.1.1
    DHCPv6 IAID . . . . . . . . . . . : 272130167
    DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-16-9E-54-97-E8-40-F2-0E-C5-81

    DNS Servers . . . . . . . . . . . : 192.168.1.1
    NetBIOS over Tcpip. . . . . . . . : Enabled

    Tunnel adapter isatap.{4120C02B-5377-45F5-B967-BDE9B198F517}:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft ISATAP Adapter
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes

    Tunnel adapter Local Area Connection* 9:

    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft 6to4 Adapter
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes

    Tunnel adapter Local Area Connection* 12:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft Teredo Tunneling Adapter
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    IPv6 Address. . . . . . . . . . . : 2001:0:9d38:6abd:20bf:3e66:b3e8:d4e7(Pref
    erred)
    Link-local IPv6 Address . . . . . : fe80::20bf:3e66:b3e8:d4e7%12(Preferred)
    Default Gateway . . . . . . . . . : ::
    NetBIOS over Tcpip. . . . . . . . : Disabled
      My Computer


  4. Posts : 1,618
    Win7 Home Premium x64 W10Pro&Home
       #4

    Go in the ethernet adapter properties, uncheck ipv6, not needed. Check in the power management tab, that is in the Configure button for the Realtek Family Controller in Device Manager, uncheck box says, Allow the computer to turn off this device to save power. Reboot...
      My Computer


  5. Posts : 6
    Windows 7 Home Premium 64bit
    Thread Starter
       #5

    DMHolt57

    Thanks for your suggestions. I've gone in and done what you said, so now I'll watch and see what happens. I'm hoping it works and if so I'll come back in and give you the credit you deserve.

    Thanks again.
      My Computer


  6. Posts : 399
    Microsoft Windows 7 Ultimate 32-bit 7601
       #6

    ipv6 is needed for windows disabling it in Ethernet properties will not disable it, It will still be running in the background. there are a few programs that need ipv6, the first one that comes to mind is Remote Desktop also when ipv6 gains more popularity you may have crippled your computer also any updates to windows are checked with ipv6 turned on so at some point down the road you may break some updates, If I were you I give your Ethernet a static ip of 8.8.8.8 and the secondary one 8.8.4.4

    Sorry meant to say change your DNS settings of the Ethernet card to a static IP of 8.8.8.8 and 8.8.4.4
    Last edited by Digital Life; 15 Feb 2015 at 19:34. Reason: Because I can
      My Computer


  7. Posts : 265
    Windows 7 Pro
       #7

    sml156 said:
    If I were you I give your Ethernet a static ip of 8.8.8.8 and the secondary one 8.8.4.4
    Those are Google DNS addresses, not sure what you meant by "giving them to the Ethernet".


    OP - you said that there are TVs, laptops, etc. connected to the network, but you also said that your PC is wired. Is the entire network wired or is it hybrid with wireless (like a Linksys wi-fi router with ports)?
      My Computer


  8. Posts : 6
    Windows 7 Home Premium 64bit
    Thread Starter
       #8

    doctore, To answer your last question, only my main computer that is having issues is hardwired the rest are all wireless.

    Unfortunately the solution offered by DMHolt57 is not working, and based on the comments by sml156 I want to go back and check my IPV6 to turn it back on. The problem is that I don't remember how I got into it to turn it off. Would someone be willing to walk me through that so I can get it back on in case it is ever needed.

    Thanks to ALL for your help!
      My Computer


  9. Posts : 1,618
    Win7 Home Premium x64 W10Pro&Home
       #9

    You can recheck the box in the device manager, network adapters, select the properties of the adapter, you will see the box...
      My Computer


  10. Posts : 6
    Windows 7 Home Premium 64bit
    Thread Starter
       #10

    Maybe I'm losing my mind. I remember when I went in previously to follow your instructions there was a box that I unchecked. Now I go into Device Manager and go into the Realtek adapter, which is my only choice, and after clicking on the different tabs I finally tried the advanced tab and there no boxes next to anything, however, there are three lines in there that also have IPV6 in parenthesis and when I click on each of those there is another "window" on the right side that says either enabled or Rx & Tx Enabled. I don't know how I found the box that I unchecked before.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 06:05.
Find Us