Tuning SNR only increases "Max" rate but NOT current rate

  1. Posts : 111
    Windows 10 Pro

    Tuning SNR only increases "Max" rate but NOT current rate

    I have been trying some different settings and my current download will stay the same but the max rate would increase which I never get, I increased the max rate from 84 to 90 mbit/s but my current just always stays at 54mbit/s in return my current upload speed does lower from 19 to 15mbit/s.

    Default Router Settings

    Custom SNR Settings

    My router is next to the where the line comes in to the house with a short cable. The cable is a standard cheap one, so I tried a shielded twisted (rj11) cable (same length) and it actually made my speeds lower!

    So I went back to the cheap flat cable.

    My isp isnt capping me because their estimates were 70mbit/s and Im on their best service.

    Dont know if this helps? (with custom settings)


    From looking at my old speedtest results, I had 16 ping with my old ADSL connection.
    Now with my new Fibre connection I get pings of 25 or 27.

    Shouldn't fibre get a faster ping ?
    Last edited by dannyk90; 12 Mar 2015 at 06:57. Reason: added more info
      My Computer

  2. Posts : 265
    Windows 7 Pro

    so I tried a shielded twisted (rj11) cable (same length) and it actually made my speeds lower!
    rj11 is a phone jack, not a twisted pair cable (shielded or not).

    You are not going to be able to increase your speed, since that's controlled by your ISP or dependent on equipment on their side of the demarcation point. On your end you have everything needed to get higher speed, i.e. an Ethernet cable and NIC that obviously both support at least 100Mbps.

    You may be able to get max speed once at 3:00am on a full moon during a leap year :)
      My Computer

  3. Posts : 111
    Windows 10 Pro
    Thread Starter

    lol I was thinking that would be the case :/

    it's a shame, stuck on 53mbit/s when I could be getting 90.
      My Computer

  4. Posts : 111
    Windows 10 Pro
    Thread Starter

    but why did the ping double when I went from ADSL to VDSL ? Getting a faster connection should have halved my ping right ?

    my router is saying now I'm only receiving 45 mbit/s down, the Path Mode has changed from "fast" to "interleaved".

    What is Path Mode ?
    Last edited by dannyk90; 13 Mar 2015 at 04:13. Reason: added more info
      My Computer

  5. Posts : 265
    Windows 7 Pro

    The speed of the connection is not correlated to your latency. There are countless factors that would affect your "ping" - distance to nearest ISP central office, equipment used, network congestion, bad network management, etc.

    If I were you - I would reset the modem, just to make sure I didn't change something I was not supposed to, and leave it be I know we all want faster internet, but 99% of the time it's all up to the ISP.
      My Computer

  6. Posts : 25,847
    Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64

    The first question I ask myself.
    Self are you getting the speeds that you are paying for. Various internet speed test can be found online. If you are getting what you are paying for your done testing.
    If not I check my equipment and settings. I found out a long time ago that the lines in my home was causing my problem. I update the in house phone lines and it solved that problem.
    If they are okay I call the I.S.P.

    If you are trying to find out why their are small fluctuation in internet speed you will spend the rest of your life looking.
      My Computer

  7. Posts : 111
    Windows 10 Pro
    Thread Starter

    Is the path mode controlled by the ISP ?

    A strange thing is... when an Open Reach engineer (official internet company, not isp) came and looked around and also looked in the cabinet outside, the connection went to 65mbit/s down and I was getting pings of 16 ms !

    Now im on 41mbit/s ping of 28 ms.

    @Layback Bear
    So I wouldnt call 20 mbit/s a small fluctuation.

    The advertised speed was 70mbit/s down.

    I'll reset the router on a weekday when no ones using the internet lol. Im sure it wont change anything, all I did was make it accept a faster speed which was shown in the images above.
      My Computer

  8. Posts : 111
    Windows 10 Pro
    Thread Starter

    Reset router to factory default, speeds still the same coming in from outside.

    Still interleaved path mode.

    What would be a good annex mode ?
    Last edited by dannyk90; 16 Mar 2015 at 05:07. Reason: added image
      My Computer

  9. Posts : 111
    Windows 10 Pro
    Thread Starter

    turns out the way they have things set up... for every time the router is turned off and on, the DLN will cap my speed because it thinks it is making my line "more stable" lol.

    Theyre going to send an engineer to reset it.
      My Computer


  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 22:56.
Find Us