"All my other computers and the iPhone dont have a problem going online via this router (Thomson ST585v6)."
Wow this is interesting. Have you tried static IP method? copy your IP settings from the machine that worked (their ipconfig /all).
Sorry for the question - how do you do that?
cu Peter
Right - found an article how to change to static :)
But shall I change TCP/IPv6 or TCP/IPv4 to static?
The ipconfig /all details from the working machine are still the same as posted previous except the lease expire date.
cu Peter
So these are the exact details from the working machine?
"Ethernet adapter Wireless Network Connection 3:
Connection-specific DNS Suffix . : lan
Description . . . . . . . . . . . : Belkin F5D8053 N Wireless USB Adapte
r
Physical Address. . . . . . . . . : 00-1C-DF-6A-37-16
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.64
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.254
DHCP Server . . . . . . . . . . . : 10.0.0.138
DNS Servers . . . . . . . . . . . : 10.0.0.138
"
Use these and follow the article and use ipv4. Disable ipv6.
Ps, i find those figures a little weird.
Here is what it should look like based on your details.
You may need to shutdown the other machine if it has 192.168.1.64 as IP. No two mahines can use the one IP at the same time.
why?
Yes, this are the ipconfig /all details - here again.
Windows IP Configuration
Host Name . . . . . . . . . . . . : hope68
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : lan
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast Eth
ernet NIC
Physical Address. . . . . . . . . : 00-13-D3-B1-4C-94
Ethernet adapter Wireless Network Connection 3:
Connection-specific DNS Suffix . : lan
Description . . . . . . . . . . . : Belkin F5D8053 N Wireless USB Adapte
r
Physical Address. . . . . . . . . : 00-1C-DF-6A-37-16
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.64
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.254
DHCP Server . . . . . . . . . . . : 10.0.0.138
DNS Servers . . . . . . . . . . . : 10.0.0.138
Lease Obtained. . . . . . . . . . : 11 November 2009 11:39:07
Lease Expires . . . . . . . . . . : 12 November 2009 11:39:07
I followed the article but then I got a message that Windows has detected an IP address conflict, another computer in this network has the same IP address. I shall contact the network administrator for help resolving this issue. And more details are available in the Win System event log.
cu Peter
On the other machine, in command prompt do a
ipconfig /release
then
ipconfig /renew
Check after that it's ip is no longer 192.168.1.64.
done - but the IP-address is still the same
And on the new computer the connection between wlan and Internet which showed before as OK is now crossed out with a red cross (in the Network and Sharing Center).
Did u check the working machine is no longer having 192.168.1.64?
You may need to restart the machine u have just made static ip.
Quote
