Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Some websites are not opened at all

29 Sep 2015   #21

Windows 7 Home Premium 64Bit

Quote   Quote: Originally Posted by GokAy View Post
I can't say anything definitive as all routers have their own wording for stuff. I would need to see for myself. Normally Dynamic DNS is used for something else -

In cmd, try:
If it returns the IP addresses then it is a DNS server you are probably connected to.
Thanks a lot,
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

Default Server:  router

> server
Default Server:  []

Server:  []

Non-authoritative answer:
Addresses:  2404:6800:4009:804::200e

I am confused which is my automatic DNS server address?

1- Your command returned, and not

2- you think that is automatic DNS server address? If so, then why does my router management interface: (first screen shot posted before) say:
Dynamic DNS Servers:

3- in the my router management interface are: (first screen shot posted before)
Dynamic DNS Servers addresses are two
However, with that command, only is shown.

4- I have previously run the command 'tracert Google' , and its result was.

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.


Tracing route to []
over a maximum of 30 hops:

  1     1 ms     3 ms    <1 ms  router []
  2  2505 ms   796 ms   849 ms
  3   823 ms   766 ms   902 ms
  4   785 ms   875 ms   769 ms
  5   747 ms   683 ms   539 ms
  6   885 ms   748 ms     *
  7   816 ms   838 ms   816 ms
  8   705 ms   779 ms   694 ms
  9   708 ms   807 ms   732 ms
 10   871 ms   876 ms   735 ms
 11   719 ms     *      750 ms
 12   841 ms     *      857 ms
 13   727 ms   901 ms   694 ms []

Trace complete.

However, when rerun 'tracert Google' again, the result was completely different. I am stumbled by this.

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.


Tracing route to []
over a maximum of 30 hops:

  1     2 ms     1 ms    <1 ms  router []
  2    60 ms    61 ms    59 ms
  3    62 ms    60 ms    60 ms
  4    62 ms    60 ms    60 ms

Trace complete.


My System SpecsSystem Spec
01 Oct 2015   #22

Windows 7 Ultimate x64 SP1

That first IP gave you answers for so it is a DNS server, you have to test those IPs separately with nslookup. So set server for the second IP as you have done for the 1st IP.

Tracert results can be different (depends on which routers are passed on the way)
My System SpecsSystem Spec

 Some websites are not opened at all

Thread Tools

Similar help and support threads
Thread Forum
How to whitelist which websites can be opened in IE 11 from admin act.
I'm looking for a solution for a small business. Due to some proprietary software that they have (required to service their hardware) the following had to be done on this Windows 7 Pro installation: - Turn off UAC - Log in as administrator So there's no way around the stipulations above. ...
Browsers & Mail
Can't get Win 7 opened up
(Edited) My computer is getting this when I boot Win7: "STOP: c000021a {Fatal System error}" I also multiboot Ubuntu 10.10 What do I do? I need to uninstall Ubuntu 10.10, that's for sure, but how? And after that, how do I fix that error?
Has anyone opened a G72 before? How to do it?
I wanted to open my notebook to change the CMOS battery, but I couldn't open it. I was able to reach RAM, HDD, Fan, but not the inside. If anyone has any experience about this, can you guide me please?
Hardware & Devices
3 Ports Opened!
I went to the site ShieldsUP! and found 3 ports opened! On the other hand, my 2nd computer shows no ports opened, only stealth/closed. How come!? I had just done a clean install of Windows 7 two days ago and I always have my firewall and antivirus on. ...
System Security
Help!'These files can't be opened'
Hi,everyone: My os is windows7 evaluation copy build 7100.Yesterday, I installed the Deepfreeze 6.61 on my computer.At first,everything works well,but questions came at my second reboot.Driver C is not accessible. When I doubleclick the shortcuts on my desktop ,the corresponding programs doesn't...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:24.
Twitter Facebook Google+