After deleting VSO by RevoUninstaller Network adapter stops working


  1. Posts : 35
    Win 7ult 32
       #1

    After deleting VSO by RevoUninstaller Network adapter stops working


    Hello everyone,

    I have two identical machines HP dc7100 CMT desktop at home, with Windows 7 ult 32bit. There is a particular software installed in it, VSO downloader, and this particular software doesn't show up among the list in the Uninstall a program in the Control Panel- which is dubious to me. So, I tried to uninstall it with RevoUninstaller - which it did perfectly well. But, after restarting the machine, I found out the internet connection was down. I tried the Troubleshooting, which says "Problems found: The Broadcom NetXtreme Gigabit Ethernet adapter is experiencing driver- or hardware-related problems - detected (with an exclamation mark in yellow triangle").

    I tried to re-install the driver by all means, from Device Manager, but it didn't work. Under the list in the Device manager, Network adapters, the "BroadcomNetXtreme Gigabit Ethernet" is flagged with the yellow exclamation mark.

    I updated the driver by locating the device manufacturer manually but it says, "Windows encountered a problem installing the driver software for your device" "This device is not working properly because Windows cannot load the drivers required for this device. (code 31)".

    Next, I pointed it to Windows\System32\Drivers\b57nd60x.sys, but to no avail since it's not .inf file.

    Yet, when I look at the back of the machine at the interface port where the LAN cable is connected, the lamp is well lit. That means, the NIC is working, but somewhat the internet connection is cut off.

    Next, I used an SD-card reader to get the driver from the working machine, and from this link

    DriverMax - Network Adapters - Broadcom - Download Broadcom NetXtreme 57xx Gigabit Controller Computer Driver Update 420373

    I downloaded the driver "NET-Broadcom-Broadcom-NetXtreme-57xx-Gigabit-Controller 2,979KB (version 10.100.4.0 date: 4-26-2009)", but when I ran this on the broken machine by pressing the Next button, it hangs on there waiting saying, "Downloading and installing..." and never moved. Of course how would it move without internet connection to do the downloading (!?) So, I stopped that one. It didn't work.

    The final option I did was to copy the b57nd60x.sys from the working machine and replaced it, but didn't do the job, either.

    I tried to restore the system to earlier point from System protection, but to my surprise, the Local Disk C: was OFF, altered. Therefore it couldn't proceed further.

    Perhaps, that's as far as I could do, and I very much appreciate for any help, please. Thank you in advance.
      My Computer


  2. Posts : 35
    Win 7ult 32
    Thread Starter
       #2

    Just to update on this problem, I am glad to tell everyone that the problem is solved. For future reference for others with the same trouble, this is how I did it. I went to the Computer icon's Properties/ Device Manager/ and (right-click) uninstalled the device with the yellow tag, "Broadcom NetXtreme Gigabit Ethernet." Without rebooting, I right-click a device in the list, in this case "Mice and other pointing devices", and clicked on "Scan for hardware changes" selection, and there it did the job. All is well now.

    Otherwise, see the #4 on this link:

    My Network adapter cannot be found?

    Thank you again for all sympathizers.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 11:19.
Find Us