Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: packets forwarded to win7 PC with routing enabled not delivered

10 Feb 2017   #1
pflaw

Windows 7 Professional 32bit
 
 
packets forwarded to win7 PC with routing enabled not delivered

Picture 1:
- The routing table in a Win7 PC with IP Routing Enabled (The service “Routing and Remote Access” also started)
- 192.168.201.162 is the IP of the Ethernet adapter LAN.
- 192.168.32.150 is the IP of the PPP adapter VPN.

Picture 2:
- The Win7 PC can reach a wanted destination 10.64.238.166 successfully with tracert output.

Picture 3:
- Another WinXP PC with its gateway set as 192.168.201.162 (Win7 PC Ethernet IP) fails to reach the same wanted destination 10.64.238.166.
- The tracert output stops at the first hop 192.168.201.162.

Does someone know the reasons behind why the packet cannot be delivered to the destination in Picture 3 ?

I have been struggling this issue over some time and hope that someone here can point out the root cause.

Thanks.




Attached Thumbnails
packets forwarded to win7 PC with routing enabled not delivered-pic1.jpg   packets forwarded to win7 PC with routing enabled not delivered-pic3.jpg  
Attached Images
packets forwarded to win7 PC with routing enabled not delivered-pic2.jpg 
My System SpecsSystem Spec
.
18 Feb 2017   #2
pflaw

Windows 7 Professional 32bit
 
 

Windows Firewall is disabled in the Win7 PC with IP routing enabled.

Anyone can help here ?
My System SpecsSystem Spec
Reply

 packets forwarded to win7 PC with routing enabled not delivered




Thread Tools




Similar help and support threads
Thread Forum
I port-forwarded, enabled DMZ, disabled firewall, and port is closed
So I'm not exactly sure what information I need to share to resolve this issue or know how to fix it. I've been trying to open this port (7198), and no matter what I try it just won't open. I'm not exactly sure how to explain the problem, but the title pretty much says all. If there's any...
Network & Sharing
Message disappears when forwarded!
I've posted on this problem before and others chimed in to report the same problem: When I forward a message to someone that message that I have forwarded disappears from my "incoming" folder and is now only found below my forwarding message in the "sent" folder. After forwarding it, there is no...
Browsers & Mail
Routing two nics on win7
Hi, I am having a problem setting up a route between to network cards with windows 7. I am on a networkengineering course and we have just set up our own servers SBS2008 i have to NICs in my windows7 box on connects to the proxy then out to the internet then the other connects to my server i am...
Network & Sharing
Routing Problem Win7 and XP
I am connecting several Windows 7 laptops via wireless to a wired network of XP machines. After several frustrating days trying to figure out why I couldn't see shares on the network I think I've finally caught the culprit: the netbios master browser. Can anyone shed some insight into what's going...
Network & Sharing
Win7 hangs when USB 2.0 enabled.
I'm using a Gigabyte GA-M750SLI-DS4 motherboard and Windows 7 hangs if I have USB 1.1 + 2.0 enabled in the BIOS. It hung on the very first installation screen, and when I try to re-enable USB 1.1 + 2.0 in the BIOS it hangs on the loading screen. I can only get it to work properly with only USB 1.1...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:55.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App