Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: After Disabling SMB V1, File and Print Sharing refuses to stay on.

05 Jun 2017   #1
Magoo

Window 7 x64
 
 
After Disabling SMB V1, File and Print Sharing refuses to stay on.

Windows 7 x64 Ultimate

I used these commands to disable SMB V1

sc.exe config lanmanworkstation depend= bowser/mrxsmb20/nsi
sc.exe config mrxsmb10 start= disabled

Set-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters" SMB1 -Type DWORD -Value 0 -Force

After I do this, I cannot get file and Print sharing to stay on/ticked.

I've tried completely disabling windows firewall and rebooting and no change.

When I turn SMB V1 back on, the problem goes away.

Anyone have any ideas?

Thanks



My System SpecsSystem Spec
.
06 Jun 2017   #2
torchwood

W7 home premium 32bit/W7HP 64bit/w10 tp insider ring
 
 

Hi Magoo,
Its a KNOWN consequence of dissablling SMB V1, the price you have to pay.
FIle and print sharing has it as a dependency.

have a read of this thread
(wannacry ransomware) disabling smb1, but cannot found it Solved - Windows 7 Help Forums

Roy
My System SpecsSystem Spec
06 Jun 2017   #3
Bertison

Windows 7/64 HPremium.
 
 

There has been a lot of falsehood and rumour surrounding wannacry and SMB V1 in Windows 7. The truth is that, if you have a good, top-range Internet Security suite, wannacry will have been blocked from invading your computer. I run Kaspersky Total Security, update it regularly and it stopped wannacry dead. I even learned about wannacry from the Kaspersky 'Dashboard': -

Dashboard --> Database update --> World Virus Activity Review. (lower R Hand corner)
My System SpecsSystem Spec
.

28 Jun 2017   #4
sconnary32

Windows 10 Enterprise x64
 
 

Not sure about all manufacturers but I have HP's in my office and the following worked.

On my HP printers:
I installed the latest firmware and under networking an improved SNMP setting was available.

I disabled SNMPv1/v2

Enabled SNMPv3

Added an appropriate service account.

Was able to scan to PCs with SMBv1 disabled.
My System SpecsSystem Spec
Reply

 After Disabling SMB V1, File and Print Sharing refuses to stay on.




Thread Tools




Similar help and support threads
Thread Forum
Registry key for file and print sharing disabling
Hey can anybody help me find a script or a registry key that will uncheck it or disable the file and print sharing on windows 7. I been trying to find a way to do it but i cant find anything that works...
Network & Sharing
Network Discovery & Printer and File Sharing will not stay on.
I just had a firewall issue. After restoring the firewall and resetting it to default settings, it turns off Network Discovery & Printer and file sharing. If I try to turn them on and save the changes, it doesn't save when I go back in. If I disable the windows firewall, they turn on and my...
Network & Sharing
Network Discovery and File/Print Sharing won't stay on
I'm running Windows 7 Ultimate x64 with no domain, just a home LAN. I recently replaced my motherboard, going from a Gigabyte Z68 UD4 to an ASRock Z68 Extreme4 Gen3. I decided to try doing this without reinstalling Windows. Both motherboards have the same Z68 chipset, so I didn't foresee too many...
General Discussion
cannot turn on File Discovery and File and Print Sharing
I am trying to set up file sharing between my two pcs and am unable to access my laptop files from my desktop. The problem I believe is that on the “change sharing options for different network profiles” page (Control Panel>Network sharing) I cannot turn on the Network discovery and...
Network & Sharing
seperate file and print sharing in Windows 7, Like Vista does
on my windows 7 system, advanced sharing has "turn on file and print sharing" on my vista system, file and print are separate controls, which i like. so i can share printers without worrying about access to my files. is there a way to separate these?
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 12:07.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App