Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Need Help With Network configuration

14 Oct 2017   #1
Itzik

windows 7
 
 
Need Help With Network configuration

Hello All,

I have a problem with my network configuration on two networks,

Network 1: 3 computers connected to a modem/router of my ISP - router is the DHPC (10.0.0.138)
Network 2: 1 of the above computers (user-PC1), with seperate modem/router connected to work - DHPC (192.168.1.254)
all connection are dsl over phone lines (separate lines).

Since the new connection to work I can't see any of the other computers, access any shered drives and pure bizarr in network map I can't access my computer.

Information:
Y computer: user-PC1 (see in pic)
1. all computers can ping each other.
2. I can access my computer and shared drives from other computers.
3. when trying to access my computer in network map I can acsses my computer but not others.
4. when trying to access computers in network (network devices) i can't access all computers include mine (user-PC1) - with an error: network provider is not

Thank all for your quick help !!!




Attached Thumbnails
Need Help With Network configuration-ipconfig.jpg   Need Help With Network configuration-route-print.jpg   Need Help With Network configuration-network-connection.jpg   Need Help With Network configuration-networkmap.jpg   Need Help With Network configuration-network-device.jpg  

My System SpecsSystem Spec
.
14 Oct 2017   #2
samuria

win 8 32 bit
 
 

Welcome to the forum. I assume your from australia as all your photos are upside down? The pc on the work network how is that connected to the rest of the network 1? As its on another ip range it wont see other pcs
My System SpecsSystem Spec
14 Oct 2017   #3
Itzik

windows 7
 
 

hi,

First I'm from Israel :)

I have two dsl modem/router connected to two separate phone line so I have separate networks 10.X.X.X and 192.168.1.254
My problem is since the installation of the second network (192.X.X.X) I can't see any other computers or drive shares in the other network (10.X.X.X), I don't want to connect between the two networks.
As I wrote before pinging from any 10.X.X.X computer to another is good, I can access the internet from any computer through the modem on 10.X.X.X .
I can only see all computers and share drives from the other 2 computers on the 10.x.x.x network, also can see shares on my computer from the other two.
Although in network device I can see all computers I can't access them -also can't access mine.
My System SpecsSystem Spec
.

14 Oct 2017   #4
samuria

win 8 32 bit
 
 

You didn't answer how is the 192 PC connected to the 10 network?
My System SpecsSystem Spec
15 Oct 2017   #5
Itzik

windows 7
 
 

hi,

1 computer OS:windows 7, two network cards.
My System SpecsSystem Spec
Reply

 Need Help With Network configuration




Thread Tools




Similar help and support threads
Thread Forum
Wake-on-LAN configuration in campus network
Greetings, I have a desktop PC(running Windows 7 Professional 64-bit) connected to the internet via an ethernet cable in my office at my university. I use Teamviewer to remotely access this PC and I would also like to turn the computer on remotely by sending a Wake-on-LAN package. I have VPN...
Network & Sharing
How do I get control over what my network configuration does?
Two days ago in the evening, my computer that always used network 2 made a network 3 that included the neighbor's computer and there was extreme lag. Even after they're gone, there's still some lag, and whether network 2 or 3 is active varies per start up. The way the network looks keeps...
Network & Sharing
Wired network configuration help.
Our network consists of 3 Desktops, all Windows 7 Home Premium, and one printer, using ATT DSL. It's presently wired through a 2Wire 2701 BHG wireless router modem/combo. It works well, when wired, but is the older G type. The upgrade plan is to use a TP-Link TD-8816 modem/router combo configured...
Network & Sharing
Best Network Configuration for Security...
I am running Windows 7 x64 Ultimate on my desktop (home) and Windows 7 x64 Pro on my laptops. I bring my personal laptop to work which I use for emails and browsing. There is sensitive information that I would not like to share for obvious reasons. I am running into a problem making sure the...
Network & Sharing
Network Configuration Oddities
I have the following network setup: * Actiontec M1000 DSL Modem/Router - configured as the network gateway: - ISP Protocol: PPPoE - Modem IP Address: 192.168.0.1 - Subnet Mask: 255.255.255.0 - DHCP Server: On - DHCP Start: 192.168.0.3 - DHCP End: 192.168.0.254 - DHCP Subnet...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:31.
Twitter Facebook Google+