Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Add a new computer to the workgroup

16 Jun 2018   #1
loninappleton

Windows 7 x64 Ultimate
 
 
Add a new computer to the workgroup

Hello again,


I am setting up a new computer with SSD boot. Windows7 installed, Driver disk run and ethernet recognized.


Though I've added to the workgroup before on other machines , something keeps this node from displaying on the desktop. No workgroup-- the workgroup is called HOMENET in that way-- is seen even after it said welcome to HOMENET etc.


A broadband box is checked with a green check which I may have selected in error during setup. I disabled that to highlight Local Area Connection (this is all I need or want for the homenet.) That has some settingswhich I am not familiar with.


Opening Network icon is still empty.


Can you help clean this up? If it means re-installing that is totally doable.


My System SpecsSystem Spec
.
16 Jun 2018   #2
loninappleton

Windows 7 x64 Ultimate
 
 

Some progress. In one of the dialogs I did not have home identified.


I have all the icons including the MSI-SSD named node.
However opening the MS-SSD forced a Win7 Diagnostic.



The attachment shows the remaining error:


Attached Thumbnails
Add a new computer to the workgroup-fileandprintershare.png  
My System SpecsSystem Spec
16 Jun 2018   #3
loninappleton

Windows 7 x64 Ultimate
 
 

Success.


Though I cannot give the exact dialog I used to straighten out homenet/homegroup from biz net.
I was able, once that was found, to find the file sharing dialog which I had not looked at in a long time.


Are there any checks I need to do from the 'broadband' checked error?


Will mark solved after a day of use.
My System SpecsSystem Spec
.

Reply

 Add a new computer to the workgroup




Thread Tools




Similar help and support threads
Thread Forum
Windows 7 not seeing XP computer on WORKGROUP
Ok so I have 3 computers at home using three different versions of Windows: Desktop - XP This computer is connected to the internet through a cable modem. The cable modem has a NETGEAR wireless router in tandem. This computer can see Laptop #1 and Laptop #2 in the WORKGROUP. Laptop #1...
Network & Sharing
Remote Desktop from workgroup computer to domain computer
I am having trouble establishing how to make a remote desktop connection using RDP from my home computer which is on a workgroup to my work laptop which is on a domain. I work from home occasionally and would like to be able to use RDP in order to use my keyboard mouse and monitor without buying a...
Network & Sharing
Computer becoming inaccessible in Workgroup
Hi, I use my windows pc as a server in my office. About 10-14 different computers access my pc through the network. Now, my problem is that my pc becomes inaccessible abruptly at any time. Like after 2-3 hours it becomes inaccessible to other users. (But at the same time, I can access other...
Network & Sharing
Trying to share a computer on a Workgroup
There is a printer hooked up to one computer on our network. All of the computers are on the same workgroup, called WORKGROUP. There are 4 computers, 3 of them are 7 and 1 is Vista. All the 7 computers are 64-bit, but the Vista PC is 32. The printer shows up on the PC it is plugged in to,...
Network & Sharing
Why can't I access my workgroup computer.
I can't access my workgroup computer I don't know why.
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:50.
Twitter Facebook Google+