Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Want plug my win7's rj45 cable into different router and print

19 Jun 2018   #1
DonM123

win7pro
 
 
What makes a win7 computer blind to a router ?

I have a www connected win7 it uses a TC LINK ROUTER. It cant find my linksys router on IP address 192.168.1.102 .

I would like to unplug from the TC link and plug into the linksys and print at times. But the www win7 computer is blind to the linksys router and the network printer that is connected to it.

I suppose I could change the Ip addresses on the linksys router and printer to be on the 169.254.2xx.xx
and try to assign them a new number with very last IP number to be different.

Or Maybe someone can shed light on my mind as to what I could do to my windows 7 that uses the TC-Link router (169.254) so It will also see the printer and linksys router.



To explain these pictures- The picture on the right is what happens when I unplug the www win7 machine from its router and plug it into the lynksys router.... something makes it so it wont see the router or the printer. The picture on the left is a machine that will connect to the lynksys router probably because I have never connected it to the TC link router and surfed the web with it.

What happens to a win 7 s configuration that makes it so it wont see a different router. ?

I have read about IP addresses and networking a lot but its all just gobbly gook to me.

[ATTACH][ATTACH][ATTACH]Want plug my win7's rj45 cable into different router and print-images.png[/ATTACH][/ATTACH][/ATTACH]




Attached Thumbnails
Want plug my win7's rj45 cable into different router and print-iplessons.jpg   Want plug my win7's rj45 cable into different router and print-iplessons2.jpg  
Attached Images
Want plug my win7's rj45 cable into different router and print-images-2-.png 
My System SpecsSystem Spec
.
19 Jun 2018   #2
Barman58

Windows 10 Pro x64 x3, Ubuntu
 
 

Hi Don

The IP address you quote for the Internet connected PC 169.254.2xx.xx is actually a default used when the system cannot decipher the actual IP address in use, this is basically a place holder which will automatically be changed when you set-up the PC and router to talk to each other.

You currently have two routers, is there a practical reason for this? or is it just a result of the history of your network?

Connecting a single Router, all the PCs and the printer to the same Subnet, (a subnet is a set of IP addresses in a specific format eg 192.168.1.0 to 192.168.1.255), will give you full access between the PCs and the internet and Printer at the same time.

If you wish to specifically isolate the Graphics systems from the internet then this can be done using facilities in the routers to set up the routing allowed (you would basically connect all the PCs to the one router and the other router to the internet and the first router and only allow a specific system to actually reach the internet, this is a much more complex setup of course
My System SpecsSystem Spec
19 Jun 2018   #3
DonM123

win7pro
 
 
I will ask this question differently

Want plug my win7's rj45 cable into different router and print-confused.jpg


My System SpecsSystem Spec
.

19 Jun 2018   #4
samuria

win 8 32 bit
 
 

192.168.1.102 is on a different network to 192.168.0.102 the ip you doesnt give the details of the dns were are you getting these ip from 2 different networks the .0 is one and .1 is another to have 2 routers the second one should have dhcp turned off and an ip in the same range as the main one
My System SpecsSystem Spec
19 Jun 2018   #5
Barman58

Windows 10 Pro x64 x3, Ubuntu
 
 

Just to clarify the way that "Dotted Decimal" notation works ...

the first two numbers show that this network is in a range that is used for internal, (non internet) addresses - The third number is a set of 256 addresses, and the fourth group is the actual address of the device.

To have all devices "see" each other the first three number groups have to be the same and each device needs a unique number in the fourth group.

This is much simpler to do if you only use one router but should be possible with two

the normal way to assign the addresses on a home network is to allow the router to assign them automatically to all attached devices. (192.168.0.1-192.168.0.255)

without understanding the way that your TC-link, (TP-Link?), Router connects to the internet I cannot be certain how to get everything to work together - if however you set up all devices to obtain their addresses automatically set this router to assign addresses in the 192.168.0.1-20 range and the other router to assign addresses in the Range 192.168.0.21-255 this should work as long as you connect the two routers together by ethernet cable or if you move the cables between the routers manually as you need to
My System SpecsSystem Spec
Reply

 Want plug my win7's rj45 cable into different router and print




Thread Tools




Similar help and support threads
Thread Forum
Can't print after New Modem/Router
I recently switch from Spectrum to At&t internet. I know that i have to establish a new connection with my printer, but i cant seem to get it printing. I already uninstalled/reinstalled the software, twice. My printer shows up in Devices/Printer, but everytime i print it just says error can not...
Hardware & Devices
Router connected network printer wont print anymore
For years I had never problems to print using a network printer attached to USB print server port of an US Robotics router. My home network has two Win 7 PC and two XP, all from Dell. Few days ago only the Windows 7 computers send printings to spooler queue where they get stuck. I worked several...
Network & Sharing
Cannot print to printer connected to router
I have two computers connected wirelessly to a router. One is a Mac running OSX and one is a PC running Windows Vista. The router is an Apple AirPort Extreme Base Station. I have a printer connected to the router with a USB cable. Both computers can successfully connect to the internet and...
Network & Sharing
installed new router, can't print
Hello, I recently upgraded my router to a Netgear N600 from a Netgear N150. I have an HP Photosmart Plus B209a-m wireless printer that was working with the N150, but is not found/recognized by the N600. I printed a wireless network test report, and it reads that the Network Name (SSID)...
General Discussion
Using windows 7 desktop as a print server via router!
Hi, I have a quad core 8GB ram desktop system which has most of my hardware connected to it like external hdd, external dvd and printer/scanner/copier, this system is running Windows 7 64bit. I also have a Compaq presario laptop running windows XP 32 bit, the laptop is extremely stable and works...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:05.
Twitter Facebook Google+