Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can't rename router USB Flash Drive's network shared folder

3 Weeks Ago   #1
justsomeguy

62 bit Windows 7
 
 
Can't rename router USB Flash Drive's network shared folder

My Windows 7 Network tells me I have two items on my network, listed under the heading, “Computer (2)”:
1. Laptop (my Windows laptop)
2. ARRIS-LGW (my ARRIS wireless router/modem)

When I ‘open’ ARRIS-LGW, I see a network folder icon named, “USBStorage Share” (because I’ve got a SanDisk USB Flash drive inserted into the USB port of my ARRIS wireless router/modem).

When I open “USBStorage Share”, I see a standard folder named, “SanDisk-4C530001140519117564”.

“SanDisk-4C530001140519117564” appears to be some identifier that Windows is retrieving from the SanDisk USB Flash drive.

The problem is, a folder named “SanDisk-4C530001140519117564” is gibberish to network users, who would much prefer it be named “Put Your Files Here”.

Is there some way I can access the Windows function that is retrieving the identifier "SanDisk-4C530001140519117564", and change it so that the resulting folder name generated by Windows Network, can be a much more meaningful, “Put Your Files Here”?

When I try to rename it while logged in as admin (or even as “Administrator”), Windows says “The action can’t be completed because the folder or a file in it is open in another program”.

I asked SanDisk about this, but their tech support claims this is a Windows issue, beyond their support limits.




Attached Images
Can't rename router USB Flash Drive's network shared folder-example2.png 
My System SpecsSystem Spec
.
3 Weeks Ago   #2
samuria

win 8 32 bit
 
 

If you right click on it choose properties it should be the volume label which you can change
My System SpecsSystem Spec
3 Weeks Ago   #3
mrjimphelps

Linux Mint 18.2 xfce 64-bit (VMWare host) / Windows 8.1 Pro 32-bit (VMWare guest)
 
 

Can you create another folder at the same level as that folder, and then use the new folder as the shared folder? Also, you can probably right-click on the folder with the long name, choose Properties, then hide it so that no one will see it and try to use it.
My System SpecsSystem Spec
.

3 Weeks Ago   #4
justsomeguy

62 bit Windows 7
 
 

Good suggestion, Samuria, but I already changed the volume label but Windows Network does not use the volume label. Windows is not looking at my Volume Label when it names the folder. It seems to be accessing some kind of hidden (flash drive) device name (SanDisk) and device ID number (4C530001140519117564) that are embedded into the flash drive.


I don't think the number 4C530001140519117564 is generated by Windows, because it is always the same number (the number survives restarts and Flash drive ejections/remounts). If the number was changing each time, I would be more likely to expect it's generated on the fly by Windows, but it never changes.
My System SpecsSystem Spec
3 Weeks Ago   #5
justsomeguy

62 bit Windows 7
 
 

MrJimPhelps, unfortunately Windows Network presents a dialog stating that "You need permission to perform this action", if I try to create a new folder next to the “SanDisk-4C530001140519117564” folder, or if I try to copy a file into the location where the “SanDisk-4C530001140519117564” folder resides. That thwarting dialog appears regardless of whether I am logged in as a normal user, or an administrative user.
My System SpecsSystem Spec
3 Weeks Ago   #6
Barman58

Windows 10 Pro x64 x3, Ubuntu
 
 

The ID that is presented to the network of any resource, in this case the space on the USB stick, is set on the sharing device. In this case the router is the "Computer" sharing the USB drive,[as shown as it appears on the network as a computer], therefore you will need to set the share name (and possibly the router device name [not the SSID but the name that the network sees].

If you enter the router internal management interface you should find an area or section to setup the sharing parameters, to whatever you like, obviously there may be restrictions on characters but nothing to severe, you may also need to add the name of the local network "Workgroup" and possibly access passwords, depending on the router
My System SpecsSystem Spec
3 Weeks Ago   #7
justsomeguy

62 bit Windows 7
 
 

Barman68, great post! - but alas, the Arris router internal management interface does not offer any access to share name, router device name, or sharing parameters. And Arris tech support only assists users in navigating and using the router's existing interface features. For anything else, their response is always, "this is beyond the scope of our tech support". But I bet you are right on, with the solution...if only there was a way to implement it!
My System SpecsSystem Spec
3 Weeks Ago   #8
Barman58

Windows 10 Pro x64 x3, Ubuntu
 
 

Indeed, I have stopped using the routers supplied by my ISP's many years ago - they are modified from the original spec to just allow the minimum possible configuration - am not familiar with the Arris range so cannot judge.

As a comparison my current Netgear Nighthawk allows me to share multiple partitions of a 4TB USB attached to the Router, and lock down access over the network.

There is one possible work around, and that is to flash the router with better firmware that does give a more practical set of options DD WRT router software is available for a number of router groups and may provide a cheap way to improve things rather than an expensive router replacement DD-WRT - Wikipedia
My System SpecsSystem Spec
3 Weeks Ago   #9
justsomeguy

62 bit Windows 7
 
 

Ironically, I went the other way....to ensure that the Wifi Modem/Router would be compatible with Comcast, I intentionally chose from Comcast's list of compatible devices and chose the Arris because I didn't want to spend a lot on a device that Comcast Support could later blame any problems on me "because we don't support that device". Maybe I'll reconsider that decision; the Arris was only around $75 at WalMart...basically a throwaway.


The Arris has another issue that bugs me: in order to allow me to access email via my required pop-server port, i have to set my firewall to its LOWEST setting because the Arris software does not allow users to custom-select whatever ports they want included in their Low, Medium and High firewall settings. You are basically stuck with using only the Arris pre-configured port lists for each category.



Regarding firmware flashing, I looked at the link you provided but, alas, didn't find any firmware listed there for Arris routers.


Long Gone are the days when you could contact tech support and actually get a knowledgeable software engineer or programmer to actually address technical questions...now we only get some well-intentioned phone tech somewhere in Malaysia who struggles with English (God bless 'em!) and is only allowed (or knowledgeable enough) to answer basic, authorized operational questions. In the good old days, we could often get an engineer or programmer who could provide a script or talk us through a software or registry hack to resolve issues like these.
My System SpecsSystem Spec
Reply

 Can't rename router USB Flash Drive's network shared folder




Thread Tools




Similar help and support threads
Thread Forum
Network permissions for a folder inside already shared folder?
Hello, I'd like to edit network permissions for one of the folders inside a shared folder. I don't want to specifically share that folder on it's own, I like that it belongs inside existing shared folder already. I've disabled Share Wizard, and I can only edit it's settings if I share it on it's...
Network & Sharing
No permissions on shared network drive folder
Hi, Very long story short, I am the new IT Engineer at a small business and I had the task to delete a shared network drive folder. Sounds easy right. Well, some of the sub folders don't have permissions on and I get the "The requested security information is either unavailable or can't be...
Network & Sharing
rename network folder on remote drive
here is the setup. The office computers are connected to a Linksys ea6350 router, which is connected to the DSL modem. Off the router is plugged a usb seagate drive. Now all the computers have a network drive for file sharing and backups. On the router, I turned on FTP and secure access, so I...
Network & Sharing
How to rename my USB flash Drive
My USB flash drive appears under the most boring of titles: REMOVABLE DISK. Clicking on 'rename' has no effect. What do I need to do to give it a name?
Hardware & Devices
Redirected "My Documents" folder, on shared network drive - can't see
Hi all, I'm having a weird issue with one computer here. The "My Documents" folder is redirected to a shared network drive. Other people can access the files in that folder and edit them. The weird thing is that the "local copy" of the file does not seem to match the one the other users on...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 17:44.
Twitter Facebook Google+